component services fail to browse server

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

when i open component services and wants to browse
mycomputer/COM+Applications it just stops on computers. and i cant install
COM+applications.. what now????

the mashine is part of a active/passive cluster with Exchange 2000 sp4


this is the event logg from when i try to open "computers" under component
services.

Event Type: Error
Event Source: COM+
Event Category: SVC
Event ID: 4097
Date: 2005-03-18
Time: 09:49:27
User: N/A
Computer: "servername"
Description:
The run-time environment has detected an inconsistency in its internal
state. Please contact Microsoft Product Support Services to report this
error. *** Error in __FILE__(926): Application image dump failed.

----------------------------------------------
Event Type: Error
Event Source: COM+
Event Category: SVC
Event ID: 4097
Date: 2005-03-18
Time: 09:49:27
User: N/A
Computer: "servername"
Description:
The run-time environment has detected an inconsistency in its internal
state. Please contact Microsoft Product Support Services to report this
error. Error in .\dtcinfo.cpp(106), hr = 8004d01b:
TransactionManager->GetWhereabouts
----------------------------------------

Event Type: Error
Event Source: COM+
Event Category: SVC
Event ID: 4097
Date: 2005-03-18
Time: 09:49:18
User: N/A
Computer: "servername"
Description:
The run-time environment has detected an inconsistency in its internal
state. Please contact Microsoft Product Support Services to report this
error. *** Error in __FILE__(926): Application image dump failed.
-------------------------

Event Type: Error
Event Source: COM+
Event Category: SVC
Event ID: 4097
Date: 2005-03-18
Time: 09:49:18
User: N/A
Computer: "servername"
Description:
The run-time environment has detected an inconsistency in its internal
state. Please contact Microsoft Product Support Services to report this
error. Error in .\dtcinfo.cpp(106), hr = 8004d01b:
TransactionManager->GetWhereabouts
 
Hi Björn,

I'm by no means an expert in this subject matter of COM+ no MSDTC, but since
no one has responded to your posting then I'll try to assist you to the best
of my ability.

Have you tried or can you try the workaround in this article?

246679 BUG: DTC Remote Coordinator Fails After DTC Is Configured for an
Invalid
http://support.microsoft.com/?id=246679

This article below has some other methods of troubleshooting the Event ID
4097.

286365 INFO: MTS/COM+ Event ID: 4097
http://support.microsoft.com/?id=286365

Because these errors usually indicate simple permissions related issues.
Download and run Filemon (usually enough by itself) and Regmon from
Sysinternals.com and then attempt the same steps again. For another
customer we had, they were getting permission denied when trying to open the
C:\ drive. We then found out that they had the identity of the COM+
application configured incorrectly. Identifying and correcting the
permission issues should resolve these errors.

Keep us posted of you progress on the newsgroup, so that others can continue
helping or learning from your experience.

--
Hope this helps,
Mike Rosado
Windows 2000 MCSE + MCDBA
Microsoft Enterprise Platform Support
Windows NT/2000/2003 Cluster Technologies

====================================================
When responding to posts, please "Reply to Group" via your newsreader so
that others may learn and benefit from your issue.
====================================================

This posting is provided "AS IS" with no warranties, and confers no rights.
<http://www.microsoft.com/info/cpyright.htm>

-----Original Message-----
 
thankes for your time but the monitoring tools dont say anything, i will try
the workaround and hope for the best.
 
Back
Top