COD + Radeon 9600 Pro - after mins gameplay display problems

  • Thread starter Thread starter Michael
  • Start date Start date
M

Michael

Hello everybody out there,

after a short period of time playing COD on my AMD64, mainboard
VIA KT8, Radeon 9600 Pro under XP Prof. SP1, Catalyst 4.1 and
first patch of COD, my display (OpenGL?) getting problems.
Its getting "flickering" block artefacts, sometimes circles in
weird colors and so on. You can still see the gameplay "through"
and the menus are slighty better, but no way to play so.
Leaving the game shows a "greasy" windows with unclear colors
(please excuse my really bad, bad english). Only a reboot helps
for a moment.
I have already tried some things:
- Reducing AGP to 4x,
- Setting OpenGL to balanced,
- Reinstall DX9b, Catalyst 4.1 (with reinstall tool),
- Reducing texture quality in COD...
- I have fast write disabled...
.... sad but true ... nothing has helped me.

I appreciate any help, tips and suggestions from anyone!
Something I didn't know or not tried until now?

Regards, Mike
 
Install the 4.2 drivers they seem to work ok for me, if not go back to
the 3.10's. The 4.1 drivers would lock my system up in COD
 
Thanks bandit...

just one hour after I wrote my problem I saw the new Catalyst
4.2 on ati's website. I downloaded and installed it at once.
It's a cruelty, but I see no improvement with the new drivers
- still the same problem after a few mins... ;(

Maybe I really have to try older drivers. Would you suggest
the 3.10 or the older 3.7?

Mike
 
Hello Adrian,

I have seen the note about a patch in various newsgroups articles
- but on the ati website the only thing that I found was the driver
version 3.10 as "patch".

Do you have better information sources where I can get this patch
(and: Is it really a "patch" or in the meantime gathered together
by ati in a driver version?).

Thank You all for your tipps!

Mike
 
Hello,

I hope there are some really "tough ati guys" around here...

;(

The last 2 hours I have tested the catalyst versions 3.10 and
3.7 - the problem still remains the same and it's getting under
my skin. I can play 15 to 30 mins without problems and then
this display problem strikes again.

Maybe its am error or problem I catched with the first COD Patch?

Mike
 
Could be a heat problem. Try running the game with the side cover off if you
feel ok opening the case and see if it will run the game ok or it could be a
power supply problem if you just added the Radeon 9600 and the problem
started and it didn't happen before with the other card. Just a few thoughts
of things that have helped me before.

Randy
 
Hello Randy,

thx for your suggestions - they are really "welcome"!

I'm running my pc nearly 24 hours a day, 7 days a week and ...
so I don't think it could be a heat problem, but I will give it
a try and play with open side cover (if open the side cover is
the only problem I would be happy ;) ).

I'm also trying (separate from the above) to play with reduced
resolution during the game (800x600) and better (!) settings
for the game textures. This was a recommendation from ati.com
website for such problems. We will see...

Mike
 
If you have a LCD screen, try the Alternative DVI freq or something like
that. I had "lines" on mine when in the dark... solved with the DVI freq
thing. :-p

Adrian
 
Hello everyone out there,

I think I finally found a solution!!!

I'm using now the new catalyst drivers 4.2 and in the smoothvision
2.1 settings for opengl I tried User Defined and set the slider more
to performance, not quality (for texture, mipmap details and so on).
I found this tip on a CoD website. Since that (and many games CoD
online) I have no problems anymore and the graphics is still ok
to me.

Again, thx everyone for his tips and I hope these information will
be valueable for others with maybe the same problems.

Bye, Mike.
 
Back
Top