cmd.exe - Application Error (0xc0000142)

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
 
KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




KM said:
osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM

Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
 
osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM
KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




KM said:
osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM

Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


KM said:
osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM
KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




KM said:
osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
Ok. Then the next try perhaps should be removing all Font substitute components.

Also, you may want to clean up the following key at runtime: [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes]

=========
Regards,
KM


osamu said:
KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


KM said:
osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM
KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




:

osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
KM said:
Ok. Then the next try perhaps should be removing all Font substitute components.

Also, you may want to clean up the following key at runtime: [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes]

=========
Regards,
KM


osamu said:
KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


KM said:
osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM

KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




:

osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
The error of cmd.exe happened though the registry was deleted.

=========
Regards,
osamu

KM said:
Ok. Then the next try perhaps should be removing all Font substitute components.

Also, you may want to clean up the following key at runtime: [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes]

=========
Regards,
KM


osamu said:
KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


KM said:
osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM

KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




:

osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
osamu,

Sorry, can't be of more help here without knowing what components are in your image.

I can only recommend you to take a deep look at the FBALog.txt and SetupApi.log on your target and see if anything suspicious is
there.

=========
Regards,
KM
The error of cmd.exe happened though the registry was deleted.

=========
Regards,
osamu

KM said:
Ok. Then the next try perhaps should be removing all Font substitute components.

Also, you may want to clean up the following key at runtime: [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes]

=========
Regards,
KM


osamu said:
KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


:

osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM

KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




:

osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
KM,

Thank you variously for help.
The solution has been understood.

<Method of settlement>
Order by which A is put is changed to the file of the project of the
development environment.
It is not the order of Bild but it is the order putting it.

In my environment,

Chinese, Taiwanese language, English, French, and German...component in
order is built in.
The result of Bildorog at that time

R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpsp2res.dll <-----
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpsp2res.dll <-----
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpsp2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpob2res.dll <-----
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpob2res.dll <-----
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpob2res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpsp1res.dll <-----
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpsp1res.dll <-----
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpsp1res.dll

English, French, and German...component in order is previously built in.
The result of Bildorog when adding afterwards Chinese and a Taiwanese language

R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpsp2res.dll
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpsp2res.dll <-----
R: Building: Windows XP Service Pack 2 Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpsp2res.dll <-----
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpob2res.dll
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpob2res.dll <-----
R: Building: Windows XP Service Pack 2 OOB Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpob2res.dll <-----
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\040C\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0407\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0410\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0419\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0C0A\xpsp1res.dll
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0804\xpsp1res.dll <-----
R: Building: Windows XP Service Pack 1 Resource DLL: copying
C:\WINDOWS\system32\mui\0404\xpsp1res.dll <-----

Because the initialization of Regional and Language Options is changed only
in putting order, it seems that the putting order is seen somewhere for the
MUI relation.



KM said:
osamu,

Sorry, can't be of more help here without knowing what components are in your image.

I can only recommend you to take a deep look at the FBALog.txt and SetupApi.log on your target and see if anything suspicious is
there.

=========
Regards,
KM
The error of cmd.exe happened though the registry was deleted.

=========
Regards,
osamu

KM said:
Ok. Then the next try perhaps should be removing all Font substitute components.

Also, you may want to clean up the following key at runtime: [HKLM\SOFTWARE\Microsoft\Windows NT\CurrentVersion\FontSubstitutes]

=========
Regards,
KM


KM,

I'm sorry English ..unskilled...

This error occurred though "Fonts:Chinese(Traditional) bitmap&TrueType
fonts" and "Fonts:Chinese(Traditional) font substitutes" components was
removed.

=========
Regards,
osamu


:

osamu,

I am sorry I could not understand what you just said.

Did you try removing the Fonts components mentioned in my previous post?

=========
Regards,
KM

KM,

The result was NG in the given content.
I want to use English for me by a basic language.
I want to use Chinese and Russian, etc. as a multi language.
I feel this error only a multi language occur.
The answer is not found even if it retrieves it with Google etc.

Please teach. m( _ _ )m




:

osamu,

Did you happen to include "Fonts: Chinese (Traditional) bitmap & TrueType fonts" and "Fonts: Chinese (Traditional) font
substitutes"
components to your image configuration?

If you did, please remove those, re-build and test the image on your target again.

http://groups.google.com/group/micr...1809de593ca/6e09752325ffec65#6e09752325ffec65

=========
Regards,
KM


Hello,

When XP Embedded is made in English, cmd.exe cannot be started.
The error of [The application failed to initialize properly(0xc0000142) and
Click on OK to terminate the application] is displayed when starting.
Dos Windows on Windows Support Compornent is put.

Please continue your favors toward the person who has the solution.

Thanks very very much!

Regards,
osamu
Click to expand...
Click to expand...
Click to expand...
 
If anyone else gets this problem there is a Microsoft hotfix that may sort it out for you -

http://support.microsoft.com/kb/950312/en-us

(The hotfix link is right at the top under the title which is - "Error message when you try to start a console-based application, such as Cmd.exe, on a Windows XP-based computer: "The application failed to initialize properly (0xc0000142)"")
 
Back
Top