clone maxx flags

  • Thread starter Thread starter sid
  • Start date Start date
S

sid

clone maxx website talks about a flag for the command that will let the
program go past errors on drive instead of stopping. But it doesn't
speicify what that flag is. There is no user manual in the
distribution. Can someone ellighten me?

thanks
SS
 
RE: Bob I - "Contact the program vendor" Sounds very knowledgable but totally useless!

The Clone Maxx website appears to be down at present...

http://www.pcinspector.de/clone-maxx/uk/welcome.htm

After about two hours intensive searching on the web, I have come to the conclusion that the availability of the user manual is limited to the website and therefore (as it's down) unobtainable.

I would also very much like to know how to use any switches (flags) or how to construct a script file (I know it will accept script files) so that I can configure the program to start, copy one disk to another, then terminate.

Concerning the Original Posters query - to stop the program from terminating on (ignoring) errors. edit the file CMAXX.SCR on the floppy disk and go down to the item:

quitOnWriteFailure=y

...and change the "y" to an "n" to stop it from exiting.

This may prove dangerous as the item above this:

ignoreErrors=y

...is set to ignore errors by default, so the only reason the program should exit is because it HAS encountered "write failure"!

Sid, you may also want to try and download the "manual" from the website, should it ever become "up and running" again!
 
Back
Top