Clean Vista install

  • Thread starter Thread starter Jeremy
  • Start date Start date
J

Jeremy

Hi
I'm trying to do a clean install of Vista 64 Home Premium. When I boot from
the DVD, windows starts to load the set-up files. Once its done this nothing
else happens! What am I doing wrong?
 
Jeremy said:
Hi
I'm trying to do a clean install of Vista 64 Home Premium. When I boot
from
the DVD, windows starts to load the set-up files. Once its done this
nothing
else happens! What am I doing wrong?
Click to expand...


You do not give the make and model of your computer or the specs (what hard
drive, SATA or IDE, how much memory, cpu, etc.). We are flying blind.
 
This is an OEM build. Athlon 64 X2 2.6GHz CPU, seagate 320GB SATA hard drive,
4GB of memory (2x2GB), Optiarc DVD RW, Asus M2N-E motherboard. This mb uses
the nforce series 5 chipset. What else do you need to know?
 
Jeremy said:
This is an OEM build. Athlon 64 X2 2.6GHz CPU, seagate 320GB SATA hard
drive,
4GB of memory (2x2GB), Optiarc DVD RW, Asus M2N-E motherboard. This mb
uses
the nforce series 5 chipset. What else do you need to know?
Click to expand...


If the Optiarc drive is SATA go into the BIOS and make sure that not only is
it ahead of the hdd in the boot order but that it is also set to IDE mode.
If that does not resolve, then remove 2GB of ram and then install. You do
not say what the ram is (pc 5300, pc6400, etc). I am assuming that the SATA
hard drive controller driver is in the firmware on that mobo.
 
Back
Top