cisco wireless

  • Thread starter Thread starter dp
  • Start date Start date
D

dp

Has anyone had any luck with the Cisco Air-CB21AG card? It is the
802.11 a/b/g pc card. I have the card running using the Windows
wireless gui but the Cisco ACU is not working. When the ACU is opened
and I try to edit or add a profile all the option in the ACU are
"grayed out" or disabled.

Any ideas?
 
Have you tried turning off the Windows wireless handling? Uncheck the box
that says:
"Use Windows to configure my wireless network settings"

Sometimes it can take a while for connection managers to discover that the
"Zero Config" isn't running that that the app should take over.
 
I did try that although I did not wait very long initially. I took
your advice tried again and waited longer restarted and still the same
results. I then thought I'd set the service to disabled, stop it, no
help. I then reboot one more time with the service disabled and again
no help.

Any chance the service might still be holding the ACU back?
 
I did try that although I did not wait very long initially. I took
your advice tried again and waited longer restarted and still the same
results. I then thought I'd set the service to disabled, stop it, no
help. I then reboot one more time with the service disabled and again
no help.

Any chance the service might still be holding the ACU back?






- Show quoted text -
Click to expand...

Further investigation shows that the card is coming up disable
according to the ACU but fully operational according to the microsoft
zero config??
 
Back
Top