Character map

  • Thread starter Thread starter Marty
  • Start date Start date
M

Marty

On web site message boards, I can't type certain special characters. For
example, take the division sign, ÷, which is created by typing Alt+0247. If
I try to type that into a message box, when I type the "4", the box
disappears and it reverts to the previous page, as if the Back button were
clicked. Then if I continue to hold down Alt, type the "7" and release the
Alt, it reverts to Google, my home page, with the ÷ in the search box. This
also happens with the plus/minus sign, Alt+0177. I have no trouble with such
characters as ½, ¾ and ¢.

What in the world is going on? Never saw anything like this in 98SE.
 
"David Candy" <.> wrote in message
Press Numlock.

Thanks, that does the trick, although it's a puzzlement why some characters
behave differently than others.
 
With numlock they are cursor keys. Once they were the only cursor keys. So You were entering

Alt + Insert (Often not used)
Alt + Down Arrow (Often not used)
Alt + Left Arrow (Previous Page in IE)
Alt + Home (Goto Home Page in IE)
 
,;Better still, get the program "ALL CHARS" ,
,;download it and install it then things work
,;all the time, its freeware, go to
,;> http://allchars.zwolnet.com


Or even better in XP (& Win2000):

<Start><Run> type "charmap" (no quotes) and <enter>. Select your font
and character and paste from the clipboard.
 
I reckon its faster than that using allchars program, but each his own.
for example press and release Ctrl (then) l then l gives me £ (ie Ctrl + L +
L = £)
(Hopefully the British pound symbol will show on newsgroup as it does at
this end).
3 keystrokes and its done.
John H
 
Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Å
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Í
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Á
Shift + Right Alt + S §
Shift + Right Alt + D Ð
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Å
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Í
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Á
Shift + Right Alt + S §
Shift + Right Alt + D Ð
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
The links are all to that one page (try scrolling). Try reading it before commenting on it. All your comments are addressed in the article. Attached is the full page it comes from (and links will work in the attachment although they just navigate the page).

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Å
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Í
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Á
Shift + Right Alt + S §
Shift + Right Alt + D Ð
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
David,
I did read it before I commented and I had manually
scrolled down to the bottom, tried a few items and
they didnt give same result as that stated re "right alt" keys.
e.g (right alt + 5 should give Euro symbol € but it gave ?
[black Club card] symbol in case it doesnt come out as that at your end.)

What I didnt do was that I didnt check to see what your
links actually said as each took me to the usual
"page cannot be displayed" screen, not move me down the page
as I would have expected if they were on same page.

That is why I gave the comment I did.

Viz, below is what I still get.
(sample was the link to Character map which is "mid://00002501/" )
+++++++++++++++++++++++++++++++++The page cannot be displayed
The page you are looking for might have been removed or had its name changed.

--------------------------------------------------------------------------

Please try the following:

a.. Open the 00002501 home page, and then look for links to the information you want.

b.. If you typed the page address in the Address bar, make sure that it is spelled correctly.

If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.




Internet Explorer
+++++++++++++++++++++++++++++++++

I thank you for the latest attachment, will read it and see what it says.
John H
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"David Candy" <.> wrote in message The links are all to that one page (try scrolling). Try reading it before commenting on it. All your comments are addressed in the article. Attached is the full page it comes from (and links will work in the attachment although they just navigate the page).

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Å
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Í
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Á
Shift + Right Alt + S §
Shift + Right Alt + D Ð
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
Look I can't handle morons like you. WTF did a cunyt like you reply in html moron. I needed to format data - what was your excuse. This means I cannot see yopu post **** head.

I yhate your f#ckin guts cuntface

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.
Use Character Map.
Use Alt + <the character code entered on the numeric keypad>
Use the US International Keyboard
The Alt Gr Key
Dead Keys
Tips
[Back to Contents]
Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.
Run Character Map
[Back to International Contents]
Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.
However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.
E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A
[Back to International Contents]
Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).
This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.
Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.
[Back to International Contents]
The Right Alt Keys
KeyDescription
Right Alt + 1i
Right Alt + 2²
Right Alt + 3³
Right Alt + 4¤
Right Alt + 5€
Right Alt + 61/4
Right Alt + 71/2
Right Alt + 83/4
Right Alt + 9'
Right Alt + 0'
Right Alt + -¥
Right Alt + =×
Right Alt + Qä
Right Alt + Wå
Right Alt + Eé
Right Alt + R(r)
Right Alt + Tþ
Right Alt + Yü
Right Alt + Uú
Right Alt + Ií
Right Alt + Oó
Right Alt + Pö
Right Alt + [<<
Right Alt + ]>>
Right Alt + \Not Sign
Right Alt + Aá
Right Alt + Sß
Right Alt + Dð
Right Alt + Lø
Right Alt + ;Pilcrow Sign
Right Alt + '´
Right Alt + Zæ
Right Alt + C(c)
Right Alt + Nñ
Right Alt + Mµ
Right Alt + ,ç
Right Alt + /¿
Shift + Right Alt + 1¹
Shift + Right Alt + 4£
Shift + Right Alt + =÷
Shift + Right Alt + QÄ
Shift + Right Alt + WÅ
Shift + Right Alt + EÉ
Shift + Right Alt + TÞ
Shift + Right Alt + YÜ
Shift + Right Alt + UÚ
Shift + Right Alt + IÍ
Shift + Right Alt + OÓ
Shift + Right Alt + PÖ
Shift + Right Alt + \¦
Shift + Right Alt + AÁ
Shift + Right Alt + S§
Shift + Right Alt + DÐ
Shift + Right Alt + LØ
Shift + Right Alt + ;°
Shift + Right Alt + '¨
Shift + Right Alt + ZÆ
Shift + Right Alt + C¢
Shift + Right Alt + NÑ
Shift + Right Alt + ,Ç

[Back to International Contents]
The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.
KeyDescription
' then CÇ
' then eé
' then yý
' then uú
' then ií
' then oó
' then aá
" then eë
" then uü
" then iï
" then oö
" then aä
` then eè
` then uù
` then iì
` then oò
~ then oõ
~ then nñ
^ then eê
^ then uû
^ then iî
^ then oô
^ then aâ

[Back to International Contents]
Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.
[Back to International Contents]
[Back to Contents]
 
Look I can't handle morons like you. WTF did a cunyt like you reply in html moron. I needed to format data - what was your excuse. This means I cannot see yopu post **** head.

I yhate your f#ckin guts cuntface

--

WOW, David! That's telling her/him!

Do you speak (and write) English also?

John <><
 
Return your computer as you are far too stupid to use one.

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
David,
I did read it before I commented and I had manually
scrolled down to the bottom, tried a few items and
they didnt give same result as that stated re "right alt" keys.
e.g (right alt + 5 should give Euro symbol € but it gave ♣
[black Club card] symbol in case it doesnt come out as that at your end.)

What I didnt do was that I didnt check to see what your
links actually said as each took me to the usual
"page cannot be displayed" screen, not move me down the page
as I would have expected if they were on same page.

That is why I gave the comment I did.

Viz, below is what I still get.
(sample was the link to Character map which is "mid://00002501/" )
+++++++++++++++++++++++++++++++++ The page cannot be displayed
The page you are looking for might have been removed or had its name changed.

------------------------------------------------------------------------

Please try the following:

a.. Open the 00002501 home page, and then look for links to the information you want.

b.. If you typed the page address in the Address bar, make sure that it is spelled correctly.

If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.




Internet Explorer
+++++++++++++++++++++++++++++++++

I thank you for the latest attachment, will read it and see what it says.
John H
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"David Candy" <.> wrote in message The links are all to that one page (try scrolling). Try reading it before commenting on it. All your comments are addressed in the article. Attached is the full page it comes from (and links will work in the attachment although they just navigate the page).

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Ã…
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Ã
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Ã
Shift + Right Alt + S §
Shift + Right Alt + D Ã
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
You **** Mike Brannigan don't you maggot. Change the formay m,oron

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
David,
I did read it before I commented and I had manually
scrolled down to the bottom, tried a few items and
they didnt give same result as that stated re "right alt" keys.
e.g (right alt + 5 should give Euro symbol € but it gave ♣
[black Club card] symbol in case it doesnt come out as that at your end.)

What I didnt do was that I didnt check to see what your
links actually said as each took me to the usual
"page cannot be displayed" screen, not move me down the page
as I would have expected if they were on same page.

That is why I gave the comment I did.

Viz, below is what I still get.
(sample was the link to Character map which is "mid://00002501/" )
+++++++++++++++++++++++++++++++++ The page cannot be displayed
The page you are looking for might have been removed or had its name changed.

------------------------------------------------------------------------

Please try the following:

a.. Open the 00002501 home page, and then look for links to the information you want.

b.. If you typed the page address in the Address bar, make sure that it is spelled correctly.

If you still cannot open the page, click the Internet Explorer
Search button to look for similar sites.




Internet Explorer
+++++++++++++++++++++++++++++++++

I thank you for the latest attachment, will read it and see what it says.
John H
+++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
"David Candy" <.> wrote in message The links are all to that one page (try scrolling). Try reading it before commenting on it. All your comments are addressed in the article. Attached is the full page it comes from (and links will work in the attachment although they just navigate the page).

--
--------------------------------------------------------------------------------------------------
http://webdiary.smh.com.au/archives/_comment/001075.html
=================================================
All links are dead,
I take it you havent used it for a while?
Wouldnt shift + right Alt + 4 depend upon ones PC settings?
Like it doesn't work on mine.
John H

"David Candy" <.> wrote in message Shift + Right Alt + 4 gives £
Entering International Characters
There is a number of ways of entering international characters and symbols.

a.. Use Character Map.
b.. Use Alt + <the character code entered on the numeric keypad>
c.. Use the US International Keyboard
a.. The Alt Gr Key
a.. Dead Keys
d.. Tips
[Back to Contents]

Entering International Characters - Character Map
Start - All Programs - Accessories - System Tools - Character Map and transfer via the clipboard.

Run Character Map

[Back to International Contents]

Alt + Character Code
Holding down alt and pressing the character code on the numeric keypad will enter that character. The keyboard language in use must support entering that character. If your keyboard supports it the code is shown on the right hand side of the status bar in Character Map else this section of the status bar is empty.

However there is two ways of entering codes. The point to remember here that the characters are the same for the first 127 codes. The difference is if the first number typed is a zero of not. If it is then the code will insert the character from the current character set else it will insert a character from the OEM character set.

E.G., Alt + 0 then 6 then 5 then release Alt enters the letter A

[Back to International Contents]

Entering International Characters - US International Keyboards
Install the US International keyboard. Start - Control Panel - Regional And Language Options - Languages - Details - Add. While here review the Key Settings to switch keyboards or turn on the Language Bar (Advanced Text Services must not be disabled).

This works in two modes. Right Alt or Shift + Right Alt + another key and also by pressing dead keys (such as accents). On non US Keyboards the Right Alt key is called Alt Gr.

Right Alt is the same key as Ctrl + Left Alt on the US International keyboards, and on almost all keyboards except the standard US keyboards where left and right keys are treated the same . This is a reason why Ctrl + Alt should not be used to set hotkeys. Also F12 should also not be used for hotkeys as it's reserved for attaching a debugger.

[Back to International Contents]

The Right Alt Keys
Key Description
Right Alt + 1 i
Right Alt + 2 ²
Right Alt + 3 ³
Right Alt + 4 ¤
Right Alt + 5 €
Right Alt + 6 1/4
Right Alt + 7 1/2
Right Alt + 8 3/4
Right Alt + 9 '
Right Alt + 0 '
Right Alt + - ¥
Right Alt + = ×
Right Alt + Q ä
Right Alt + W å
Right Alt + E é
Right Alt + R (r)
Right Alt + T þ
Right Alt + Y ü
Right Alt + U ú
Right Alt + I í
Right Alt + O ó
Right Alt + P ö
Right Alt + [ <<
Right Alt + ] >>
Right Alt + \ Not Sign
Right Alt + A á
Right Alt + S ß
Right Alt + D ð
Right Alt + L ø
Right Alt + ; Pilcrow Sign
Right Alt + ' ´
Right Alt + Z æ
Right Alt + C (c)
Right Alt + N ñ
Right Alt + M µ
Right Alt + , ç
Right Alt + / ¿
Shift + Right Alt + 1 ¹
Shift + Right Alt + 4 £
Shift + Right Alt + = ÷
Shift + Right Alt + Q Ä
Shift + Right Alt + W Ã…
Shift + Right Alt + E É
Shift + Right Alt + T Þ
Shift + Right Alt + Y Ü
Shift + Right Alt + U Ú
Shift + Right Alt + I Ã
Shift + Right Alt + O Ó
Shift + Right Alt + P Ö
Shift + Right Alt + \ ¦
Shift + Right Alt + A Ã
Shift + Right Alt + S §
Shift + Right Alt + D Ã
Shift + Right Alt + L Ø
Shift + Right Alt + ; °
Shift + Right Alt + ' ¨
Shift + Right Alt + Z Æ
Shift + Right Alt + C ¢
Shift + Right Alt + N Ñ
Shift + Right Alt + , Ç

[Back to International Contents]

The Dead Keys
The dead keys are the apostrophe ('), quotation mark ("), accent grave (`), tilde (~), and caret (^). If these are pressed the system waits for the next key. If it is in the list below then it enters the symbol character else it enters both keys seperately. These work with uppercase where appropiate.

Key Description
' then C Ç
' then e é
' then y ý
' then u ú
' then i í
' then o ó
' then a á
" then e ë
" then u ü
" then i ï
" then o ö
" then a ä
` then e è
` then u ù
` then i ì
` then o ò
~ then o õ
~ then n ñ
^ then e ê
^ then u û
^ then i î
^ then o ô
^ then a â

[Back to International Contents]

Tips
Like Accessibility there is a trick here with general applicability. Normally Caps Lock is on or off and stays on or off untill the key is pressed again. This can be changed to act like a typewriter at Start - Control Panel - Regional And Language Options - Languages - Details - Key Settings and one can select whether another Caps Lock press will turn off Caps Lock or if pressing the Shift key will turn it off like on a typewriter.

[Back to International Contents]

[Back to Contents]
 
I second your recommendation. AllChars is much simpler than using the
character map because (for instance) I can never remember where to
find the ¢ sign in char map.... and waste a lot of time trying to find
it, but ctrl, /, c produces ¢ in an instant.

```````````````````````
 
That's because you are very stupid and can't read and are a total moron, a cretinous moron at that. Read the thread moron. And just because a retard like you are really stupid don't assume others are so don't post on subjects you know nothing about.
 
Back
Top