Change to 10Mbps Half Duplex

  • Thread starter Thread starter Control Freq
  • Start date Start date
C

Control Freq

Hi,
I think the NIC in my XP embedded touch screen is causing a problem
with the network. It has been suggested that I change the speed/duplex
to 10Mbps Half Duplex.

Can someone show me a command line interface to do this?

Sorry if this has been asked before.

Thanks in anticipation.
 
If your image allows access to the Devices List in System > Hardware:
In the Device List, select your Network adapter, and its Properties:
Advanced > Media Type is default set to auto,
by the drop down list you may choose 10M half duplex.
I guess that this will not be the solution to your network problems.....
regards Raffaele
 
If your image allows access to the Devices List in System > Hardware:
In the Device List, select your Network adapter, and its Properties:
Advanced > Media Type is default set to auto,
by the drop down list you may choose 10M half duplex.
I guess that this will not be the solution to your network problems.....
regards Raffaele
Click to expand...

Hi, thanks for the reply.
Unfortunately, my image doesn't have this.
I can popup a Cmd Prompt, so, is there a command line alternative to
your suggestion?

Thanks
 
Try to open the Network Connections Windows, typing from the command line:
ncpa.cpl
then it should open the network connections window where you should see and
change the adapter's speed.
Raffaele
 
Back
Top