Change Schema Master Fail

  • Thread starter Thread starter New User
  • Start date Start date
N

New User

Hello:

I have try to change the Schema Master to another server by the
following steps.
1. Click *Start*, and then click *Run*. In the *Open* box, type mmc,
and then click *OK*.
2. When MMC starts, click *Add/Remove Snap-in* on the *Console* menu.
3. Click *Add*.
4. Click *Active Directory Schema*, click *Add*, and then click *Close*.
5. Click *OK*.
6. Right-click *Active Directory Schema*, and then click *Operations
Master*.
7. Click *The Schema may be modified on this Domain Controller*.
8. Click *OK*.


After in step 7, the change button was already dim out.

Does anything I am wrong?

Thanks!
 
are you member of schema admins?

--

Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)

# Jorge de Almeida Pinto # MVP Windows Server - Directory Services

BLOG --> http://blogs.dirteam.com/blogs/jorge/default.aspx
-----------------------------------------------------------------------------
* This posting is provided "AS IS" with no warranties and confers no rights!
* Always test before implementing!
-----------------------------------------------------------------------------


-----------------------------------------------------------------------------
Hello:

I have try to change the Schema Master to another server by the following steps.
1. Click Start, and then click Run. In the Open box, type mmc, and then click OK.
2. When MMC starts, click Add/Remove Snap-in on the Console menu.
3. Click Add.
4. Click Active Directory Schema, click Add, and then click Close.
5. Click OK.
6. Right-click Active Directory Schema, and then click Operations Master.
7. Click The Schema may be modified on this Domain Controller.
8. Click OK.

After in step 7, the change button was already dim out.

Does anything I am wrong?

Thanks!
 
Ohh.. I forget to add as Schema Admin. But another problem form.

I have try to transfer or seize also fail.

transfer schema master
ldap_modify_sW error 0x34(52 (Unavailable).
Ldap extended error message is 000020AF: SvcErr: DSID-032101BD, problem 5002
(UNAVAILABLE), data 8524

Any idea?
 
Hello:

I have try to Transfer at the first time and it cause error. Then I try
to seize but also fail.

Thanks!
 
AGAIN..
transfer or seize? it is either one or the other but NOT both!

we understand it does not work. however, from your "it does not work" we
cannot just guess what the problem is. you need to give error messages,
event IDs, etc. log outputs, etc.
Besides that, and also important, things you or others have done before
haveing this error, a sum up of your environment, etc.

from the first error you gave the only I can say right is that you either
have:
(1) connectivity issues
OR
(2) DNS issues

--

Cheers,
(HOPEFULLY THIS INFORMATION HELPS YOU!)

# Jorge de Almeida Pinto # MVP Windows Server - Directory Services

BLOG --> http://blogs.dirteam.com/blogs/jorge/default.aspx
 
Back
Top