Change color of interactive button Metal Tab 6

  • Thread starter Thread starter Guest
  • Start date Start date
Yes,
You can change the size to make more room for text and also change the
"Background Color".
Changing the size of the Image in an Interactive Button
Demo for size........
http://www.xmas-i-am.com/test/button_image.htm

This example shows the Interactive button "Image" tab and toward the bottom
you will see that you can change the color. (or even make it transparent)
Experiment a little Have FUN!

John Malone
================
| Hi,
| Can you change the colors of the interactive vuttons that come with FP.
| Thanks
 
Thans John for your post.
I am trying to change the actual color of Metal Tab 6 from the greenish tint
to more of a teal to fit with a Southwest color schem. Can that be done. I
also have Photo Impact 11 but cannot figure out how to make a custom button.
 
NO, You can change it after it is made though..
When you save the page you will see (or be asked) where to save the
buttons... (Normally in the "Images" folder)
You can then go to the images folder and change them in Photo Impact.
Note: There are three (3) images for each button. Normal, Hover & Active
states.

Hope this helps

John Malone
=====================
| Thans John for your post.
| I am trying to change the actual color of Metal Tab 6 from the greenish
tint
| to more of a teal to fit with a Southwest color schem. Can that be done. I
| also have Photo Impact 11 but cannot figure out how to make a custom
button.
|
| "John Malone" wrote:
|
| > Yes,
| > You can change the size to make more room for text and also change the
| > "Background Color".
| > Changing the size of the Image in an Interactive Button
| > Demo for size........
| > http://www.xmas-i-am.com/test/button_image.htm
| >
| > This example shows the Interactive button "Image" tab and toward the
bottom
| > you will see that you can change the color. (or even make it
transparent)
| > Experiment a little Have FUN!
| >
| > John Malone
| > ================
| > | > | Hi,
| > | Can you change the colors of the interactive vuttons that come with
FP.
| > | Thanks
| >
| >
| >
 
Thanks john,
I have not been able to figure out how to change the color in Photo Impact.
I open the image but what next. I know I am asking a lot but Thanks.
 
Well, I don't have Photo Impact so I can't help you there.
But I do know it can be done.. Even if you make another image Sized about
the same and then name it the same as the button image (button1.jpg,
button2.jpg, & button3.jpg) then put it in the "Images" folder (Import it
over writing the original files) the new image becomes the button.
So it is like making your own buttons.. But using the Interactive button
feature to write the code (Normal, Hover & Active states) for you.

Sorry I can't help more.

John Malone
================
| Thanks john,
| I have not been able to figure out how to change the color in Photo
Impact.
| I open the image but what next. I know I am asking a lot but Thanks.
|
| "John Malone" wrote:
|
| > NO, You can change it after it is made though..
| > When you save the page you will see (or be asked) where to save the
| > buttons... (Normally in the "Images" folder)
| > You can then go to the images folder and change them in Photo Impact.
| > Note: There are three (3) images for each button. Normal, Hover & Active
| > states.
| >
| > Hope this helps
| >
| > John Malone
| > =====================
| > | > | Thans John for your post.
| > | I am trying to change the actual color of Metal Tab 6 from the
greenish
| > tint
| > | to more of a teal to fit with a Southwest color schem. Can that be
done. I
| > | also have Photo Impact 11 but cannot figure out how to make a custom
| > button.
| > |
| > | "John Malone" wrote:
| > |
| > | > Yes,
| > | > You can change the size to make more room for text and also change
the
| > | > "Background Color".
| > | > Changing the size of the Image in an Interactive Button
| > | > Demo for size........
| > | > http://www.xmas-i-am.com/test/button_image.htm
| > | >
| > | > This example shows the Interactive button "Image" tab and toward the
| > bottom
| > | > you will see that you can change the color. (or even make it
| > transparent)
| > | > Experiment a little Have FUN!
| > | >
| > | > John Malone
| > | > ================
| > | > | > | > | Hi,
| > | > | Can you change the colors of the interactive vuttons that come
with
| > FP.
| > | > | Thanks
| > | >
| > | >
| > | >
| >
| >
| >
 
Your Welcome!

John Malone
===============
| Thank you!!
|
| "John Malone" wrote:
|
| > Well, I don't have Photo Impact so I can't help you there.
| > But I do know it can be done.. Even if you make another image Sized
about
| > the same and then name it the same as the button image (button1.jpg,
| > button2.jpg, & button3.jpg) then put it in the "Images" folder (Import
it
| > over writing the original files) the new image becomes the button.
| > So it is like making your own buttons.. But using the Interactive button
| > feature to write the code (Normal, Hover & Active states) for you.
| >
| > Sorry I can't help more.
| >
| > John Malone
| > ================
| > | > | Thanks john,
| > | I have not been able to figure out how to change the color in Photo
| > Impact.
| > | I open the image but what next. I know I am asking a lot but Thanks.
| > |
| > | "John Malone" wrote:
| > |
| > | > NO, You can change it after it is made though..
| > | > When you save the page you will see (or be asked) where to save the
| > | > buttons... (Normally in the "Images" folder)
| > | > You can then go to the images folder and change them in Photo
Impact.
| > | > Note: There are three (3) images for each button. Normal, Hover &
Active
| > | > states.
| > | >
| > | > Hope this helps
| > | >
| > | > John Malone
| > | > =====================
| > | > | > | > | Thans John for your post.
| > | > | I am trying to change the actual color of Metal Tab 6 from the
| > greenish
| > | > tint
| > | > | to more of a teal to fit with a Southwest color schem. Can that be
| > done. I
| > | > | also have Photo Impact 11 but cannot figure out how to make a
custom
| > | > button.
| > | > |
| > | > | "John Malone" wrote:
| > | > |
| > | > | > Yes,
| > | > | > You can change the size to make more room for text and also
change
| > the
| > | > | > "Background Color".
| > | > | > Changing the size of the Image in an Interactive Button
| > | > | > Demo for size........
| > | > | > http://www.xmas-i-am.com/test/button_image.htm
| > | > | >
| > | > | > This example shows the Interactive button "Image" tab and toward
the
| > | > bottom
| > | > | > you will see that you can change the color. (or even make it
| > | > transparent)
| > | > | > Experiment a little Have FUN!
| > | > | >
| > | > | > John Malone
| > | > | > ================
message
| > | > | > | > | > | > | Hi,
| > | > | > | Can you change the colors of the interactive vuttons that come
| > with
| > | > FP.
| > | > | > | Thanks
| > | > | >
| > | > | >
| > | > | >
| > | >
| > | >
| > | >
| >
| >
| >
 
I am adding text to a manageable area. I am unable to select header1 and the
next line be normal. What am I missing?
 
Sorry for the delay.
You can enter the Heading text and then hit return and it is still Heading
text?
Or you can not get the Heading text?

It should turn to normal text when you hit enter and start a new paragraph.
Now if you want this on the same Line..... You can't.

But you can type a few words (or a line) and then highlight the words you
want to make larger then just increase the font size to the same as a
Heading 1 then bold the text so it matches.

Am I missing something... ?

John Malone
============
|
| I am adding text to a manageable area. I am unable to select header1 and
the
| next line be normal. What am I missing?
| "John Malone" wrote:
|
| > Well, I don't have Photo Impact so I can't help you there.
| > But I do know it can be done.. Even if you make another image Sized
about
| > the same and then name it the same as the button image (button1.jpg,
| > button2.jpg, & button3.jpg) then put it in the "Images" folder (Import
it
| > over writing the original files) the new image becomes the button.
| > So it is like making your own buttons.. But using the Interactive button
| > feature to write the code (Normal, Hover & Active states) for you.
| >
| > Sorry I can't help more.
| >
| > John Malone
| > ================
| > | > | Thanks john,
| > | I have not been able to figure out how to change the color in Photo
| > Impact.
| > | I open the image but what next. I know I am asking a lot but Thanks.
| > |
| > | "John Malone" wrote:
| > |
| > | > NO, You can change it after it is made though..
| > | > When you save the page you will see (or be asked) where to save the
| > | > buttons... (Normally in the "Images" folder)
| > | > You can then go to the images folder and change them in Photo
Impact.
| > | > Note: There are three (3) images for each button. Normal, Hover &
Active
| > | > states.
| > | >
| > | > Hope this helps
| > | >
| > | > John Malone
| > | > =====================
| > | > | > | > | Thans John for your post.
| > | > | I am trying to change the actual color of Metal Tab 6 from the
| > greenish
| > | > tint
| > | > | to more of a teal to fit with a Southwest color schem. Can that be
| > done. I
| > | > | also have Photo Impact 11 but cannot figure out how to make a
custom
| > | > button.
| > | > |
| > | > | "John Malone" wrote:
| > | > |
| > | > | > Yes,
| > | > | > You can change the size to make more room for text and also
change
| > the
| > | > | > "Background Color".
| > | > | > Changing the size of the Image in an Interactive Button
| > | > | > Demo for size........
| > | > | > http://www.xmas-i-am.com/test/button_image.htm
| > | > | >
| > | > | > This example shows the Interactive button "Image" tab and toward
the
| > | > bottom
| > | > | > you will see that you can change the color. (or even make it
| > | > transparent)
| > | > | > Experiment a little Have FUN!
| > | > | >
| > | > | > John Malone
| > | > | > ================
message
| > | > | > | > | > | > | Hi,
| > | > | > | Can you change the colors of the interactive vuttons that come
| > with
| > | > FP.
| > | > | > | Thanks
| > | > | >
| > | > | >
| > | > | >
| > | >
| > | >
| > | >
| >
| >
| >
 
See http://support.microsoft.com/default.aspx?scid=kb;en-us;555010

--




| Thans John for your post.
| I am trying to change the actual color of Metal Tab 6 from the greenish tint
| to more of a teal to fit with a Southwest color schem. Can that be done. I
| also have Photo Impact 11 but cannot figure out how to make a custom button.
|
| "John Malone" wrote:
|
| > Yes,
| > You can change the size to make more room for text and also change the
| > "Background Color".
| > Changing the size of the Image in an Interactive Button
| > Demo for size........
| > http://www.xmas-i-am.com/test/button_image.htm
| >
| > This example shows the Interactive button "Image" tab and toward the bottom
| > you will see that you can change the color. (or even make it transparent)
| > Experiment a little Have FUN!
| >
| > John Malone
| > ================
| > | > | Hi,
| > | Can you change the colors of the interactive vuttons that come with FP.
| > | Thanks
| >
| >
| >
 
Back
Top