CDRW & DVDRW Woes After WIndows Update

  • Thread starter Thread starter Pete
  • Start date Start date
P

Pete

I have a Sony CRX220E CD-RW and a Sony DRU-500A DVD-RW drive installed
in my Windows XP Pro system. They both worked flawlessly until after a
Critical Update session. This was prior to my upgrading to SP-2 and I
can't really say which update was responsible because I batched a bunch
of them at once.

Now the drives don't want to recognize new CDs and DVDs when I insert
them. The drives appear in My Computer like they should but I get a "No
Disk" or similar errors when I try to access them. I can usually get
them to wake up if I go into the device properties screen and click the
"Populate" button on the "Volumes" tab or run a Sandra diagnostic on the
drive but if left to their own devices, the drives will never recognize
new media on their own.

Every diagnostic routine I've run says everything is working fine. I
have uninstalled and reinstalled the drivers but that doesn't help. I
installed recently SP-2 hoping that would clear the problem but that
hasn't helped either.

Anyone have any ideas? I'm stumped.

Windows XP/2002 Pro. 5.01.2600 (Service Pack 2)
Intel D865PERL motherboard
Intel RL86510A.86A.0073.P14.0402030948 BIOS
Intel Pentium 4 CPU 2.66GHz
1023MB DDR-SDRAM
CD-RW driver: Microsoft version 5.1.2535.0
DVD-RW driver: Microsoft version 5.1.2535.0

Pete
 
Good luck Pete - I have the exact same problem - I have tried everything that
is listed in this newsgroup to no avail. I find it interesting as I have a
Sony DRU-530A DVD-RW. I wonder if it is a coincidence or not!?!?!! I have
been to the WSony site and downloaded all the firmware and other tests. I
still can't get XP to recognize my drives. I an currently using Record Now
and MyDVD to burn my disk. I did like the ease of the internal XP burning
software, but I am beginning to lose fith that I will ever get that back.
 
Back
Top