CD Roms not recognoized

  • Thread starter Thread starter PeteK
  • Start date Start date
P

PeteK

I had to replace my motherboard due to a failure. Getting Win XP Pro
back to install has been a real pain. I have it now where I can boot
into windows. The 2 things that are not being recognized are my CD Rom
and DVD Rom. They have a yellow ? next to them in device manager. I've
deleted them several times and still they won't be recogonized. One
is a Samsung DVD-ROM SD-636 the other just says DVDRW IDE1108. Anyone
have any Ideas how I can get them recognized? I can't get SP2 on there
until I can get these drives working

Any help would be appreciated
 
Did you insatll the motherboard drivers? Should be on a CD that came with
the motherboard.
 
Jerry said:
Did you insatll the motherboard drivers? Should be on a CD that came with
the motherboard.
Click to expand...
yes I did. I didnt see anything specific to those devices though.
 
Jerry said:
Did you insatll the motherboard drivers? Should be on a CD that came with
the motherboard.
Click to expand...
I meant to also say that they are recognized by the bios. The error in
device manageer is "Windows cannot load the device driver for this
hardware. The driver may be corrupted or missing. (Code 39)"
 
Goto http://aumha.org/win5/a/xpcd.php#problems
See the second "problem" (read the caveats)
Run the provided registry patch

That should fix your problem (basically, a filter driver is missing or
non-operational, the registry patch will delete the filter drivers
references for your cdrom(s))


Basically, the reg file from above carries out the steps displayed at this
website


CD-ROM Drive or DVD-ROM Drive Missing After You Install Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

CD-ROM Access Is Missing and Messages Cite Error Code 31, Code 32, Code 19,
or Code 39 After You Remove Easy CD Creator in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314060


(It'll fix code 41 errors too as per the contents of the last kb article)
 
Gary said:
Goto http://aumha.org/win5/a/xpcd.php#problems
See the second "problem" (read the caveats)
Run the provided registry patch

That should fix your problem (basically, a filter driver is missing or
non-operational, the registry patch will delete the filter drivers
references for your cdrom(s))


Basically, the reg file from above carries out the steps displayed at this
website


CD-ROM Drive or DVD-ROM Drive Missing After You Install Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;320553

CD-ROM Access Is Missing and Messages Cite Error Code 31, Code 32, Code 19,
or Code 39 After You Remove Easy CD Creator in Windows XP
http://support.microsoft.com/default.aspx?scid=kb;en-us;314060


(It'll fix code 41 errors too as per the contents of the last kb article)
Click to expand...
Thanks Gary. I had already found that first article, and edited the
registry as indicated. Worked like a champ!

Thanks again.
 
Hi everyone,

I just found myslef in the same situation. Last change I remember doing
where uninstalling iTunes 4.9 from Apple and MS AntiSpyware beta.

First place I thought of looking for an answer was here, and go it fixed
with the refered pacth rigth away.

Just wanted to say thank you for posting.!

gonmb

XP PRO SP2 - 2 LITEON DRIVES: 1 DVD-RW, 1 CD-ROM.
 
Back
Top