CD-Rom Problem

  • Thread starter Thread starter Esteban
  • Start date Start date
E

Esteban

Hi,

I have few Blue screen sometimes once a week or twice or more it's
depend. The error is not always the same, but the last one i got was a
IRQL_NOT_LESS_OR_EQUAL error (0x0...a).

I have this kind of message only when i'm rebooting and sometimes when
i'm in windows explorer, but as i said it's not the same message error.
I just don't know what it is.

I tested the memory with memtest and everything is fine.
I disabled the onboard video card and installed a new one in a pci slot
with new driver and it still pop some error.

The only problem i found in the hardware is this:
When i put the HD in primary ide it doesn't detect it.
When i put the HD in Secondary it works fine.
When i put the CDROM in primary it works fine.
When i put the CDROM in secondary it doesn't detect it in the bios or
on system boot but it detects it in the OS(WinXP) weird no?<

Anyone as a clue?

Thanks a lot!

Esteban
 
Well i'm going to check if the jumper or correct but i can't see why
this would have an impact because i didn't talk about Master or Slave
but 2 different cable that are primary and secondary and both on
master.... you still think that's the only solution...oh well...thanks!
 
Back
Top