O
oldgrey
Can someone please upload the CD ROM to allow installation of the
Linksys Router BEFSX41.
TIA
Linksys Router BEFSX41.
TIA
You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an alternative browser.
You should upgrade or use an alternative browser.
P
philo
oldgrey said:Can someone please upload the CD ROM to allow installation of the
Linksys Router BEFSX41.
TIA
just go to the mfs's website and get the driver
or try www.driverguide.com
W
Wayne Morgan
You don't need it. If the router isn't at default settings and you don't
remember it's IP address and password, press and hold the reset button until
you see the light start to flash. It should take less than 10 seconds. This
will reset the router to default settings. Once this is done, reboot your
computer to get the new IP address from the router, in case they were set
for other than default of 192.168.1.x. Next, open your Internet browser and
go to http://192.168.1.1, there is no user name and the default password is
admin. You will now be able to configure the router.
remember it's IP address and password, press and hold the reset button until
you see the light start to flash. It should take less than 10 seconds. This
will reset the router to default settings. Once this is done, reboot your
computer to get the new IP address from the router, in case they were set
for other than default of 192.168.1.x. Next, open your Internet browser and
go to http://192.168.1.1, there is no user name and the default password is
admin. You will now be able to configure the router.
S
S.Heenan
philo said:just go to the mfs's website and get the driver
or try www.driverguide.com
BWAHAHAHAHAHAHAHAHAHAH
<aside> He's up to his old tricks in ach.
S
S.Heenan
oldgrey said:Can someone please upload the CD ROM to allow installation of the
Linksys Router BEFSX41.
Type 192.168.1.1 Leave username blank. Password is admin. Login.
The Status page should read "Obtain an IP automatically" for the Cox
network. Change time zone as required. Save settings. Choose the Security
tab. Firewall should be enabled. Save. Choose the Admin page. Change the
default password from admin to something longer. For other settings, consult
Linksys.com since you don't have the CD.
O
oldgrey
New question. I have installed the Linksys Router BEFSX41. When I
was using ZoneAlarm it used to report how many times someone was
trying to get at your system. Is there such a capability with this
router? If so can someone tell me how to gather the data.
Thanks,
was using ZoneAlarm it used to report how many times someone was
trying to get at your system. Is there such a capability with this
router? If so can someone tell me how to gather the data.
Thanks,
K
kony
New question. I have installed the Linksys Router BEFSX41. When I
was using ZoneAlarm it used to report how many times someone was
trying to get at your system. Is there such a capability with this
router? If so can someone tell me how to gather the data.
Thanks,
Does it matter? Port scans are automated, you'd get
thousands of "random" scans and it's triva at best to know
it. Regardless, check the router's menus for a log.
S
S.Heenan
oldgrey said:New question. I have installed the Linksys Router BEFSX41. When I
was using ZoneAlarm it used to report how many times someone was
trying to get at your system. Is there such a capability with this
router? If so can someone tell me how to gather the data.
Administration tab|Log|Enable|Save Settings This will enable logging.