cd drive problems

  • Thread starter Thread starter lindon.haeven
  • Start date Start date
L

lindon.haeven

hi i have a dvd and a cd writer on the sane ide cable dvd set as master cd
set as slave.
problem is some times if i put a dvd in to the dvd drive i get a no cd error
and when i go in to my computer the cd and dvd dive have gone.

the drives seem to work ok then they are there can you help please i am
running xp with sp2 installed.

thanks lindon
 
Hi L. Check the IDE and power cables to your DVD and CD are secure. Also
check in Device Manager that you`ve got no errors. You could also check
Admin Tools\Event Viewer to see if you have any errors showing there. best
wishes..J
 
tested all that all reports fine just unplugged the slave drive to see if
its a drive playing up or on the way out.
 
Hi L. the mouse sounds suspicious. You could have a bit of system
corruption. Think myself I`d run my safetyware. ie. Adaware, Spybot
etc.etc.. Clean out Cookies, Temp and Temp Internet files. The go to
Start\Run type in CMD, and in the DOS window type SFC /scannow
You will be asked for your winXPSP2 disk. Give it the disk and go make a cup
of tea. This will refresh all your windows files. ..J

lindon.haeven said:
windows xp
clone cd
Click to expand...

all drivers defult from window.
 
thanks i give it a go.

old jon said:
Hi L. the mouse sounds suspicious. You could have a bit of system
corruption. Think myself I`d run my safetyware. ie. Adaware, Spybot
etc.etc.. Clean out Cookies, Temp and Temp Internet files. The go to
Start\Run type in CMD, and in the DOS window type SFC /scannow
You will be asked for your winXPSP2 disk. Give it the disk and go make a
cup of tea. This will refresh all your windows files. ..J



all drivers defult from window.
Click to expand...
 
no luck, i think its a problem with one of the drives
the cd writer i think as it only happened when both drives are installed,

strange that it takes both drives out if one fails,mite be a irq thing
going to run the computer with just the dvd drive in and see if that fails
if that happens then its new dvd drive time.

thanks for your help did not know about the windows file checkers thanks.
 
Good luck L.

lindon.haeven said:
no luck, i think its a problem with one of the drives
the cd writer i think as it only happened when both drives are installed,

strange that it takes both drives out if one fails,mite be a irq thing
going to run the computer with just the dvd drive in and see if that fails
if that happens then its new dvd drive time.

thanks for your help did not know about the windows file checkers thanks.
Click to expand...
 
been testing my drives and i think the problem is with CD clone program
don't know why but removed this and the problem seems to have gone away.
 
A CDROM drive will not read a DVD disk, it will just say "please
insert a disk in drive D"

But the other is possible, a DVD player will read a CDROM.
 
Back
Top