Case airflow question

  • Thread starter Thread starter ck26
  • Start date Start date
C

ck26

I'm wondering whether its better to have the chassis fan blowing air into
the case or out from the back of the machine - there's no other inlets to
the case since its a bog standard Tiny ATX case. I'm not thinking of
upgrading the case or cutting holes in it, before any of you suggest that
idea. Initial tests using Sandra shows that there's no really noticeable
difference. What's other people's opinions?
 
ck26 said:
I'm wondering whether its better to have the chassis fan blowing air into
the case or out from the back of the machine - there's no other inlets to
the case since its a bog standard Tiny ATX case. I'm not thinking of
upgrading the case or cutting holes in it, before any of you suggest that
idea. Initial tests using Sandra shows that there's no really noticeable
difference. What's other people's opinions?
Click to expand...

IMO, the optimal configuration ensures coolest air flows freely over, around
and/or through the hottest components. Whether the fan sucks or blows is of
no importance unless an air filter is involved.
 
IMO, the optimal configuration ensures coolest air flows freely over,
around
and/or through the hottest components. Whether the fan sucks or blows is of
no importance unless an air filter is involved.
Click to expand...

Yeah, that was along the lines of what I was thinking - so long as the
movement past the hot bits is adequate, then its taking the heat away - in
what direction, I guess is of no importance to those hot bits. I guess that
the importance may be to those other parts that are not being directly
cooled by fans though, which is sort of what I was implying.
 
Yeah, that was along the lines of what I was thinking - so long as the
movement past the hot bits is adequate, then its taking the heat away - in
what direction, I guess is of no importance to those hot bits. I guess that
the importance may be to those other parts that are not being directly
cooled by fans though, which is sort of what I was implying.
Click to expand...
if you're worried about cooling take one of the side panels off Just
remember to clean the inside once in awhile
 
if you're worried about cooling take one of the side panels off Just
remember to clean the inside once in awhile
Click to expand...

Side panel either on or off doesn't make much difference around this place.
There's always more fur inside the machine than on the pets. I think they
like sleeping against it for the warmth. <g>
 
It should blow OUT the back of the case so it's forced to suck air in thru
all the cracks and openings elsewhere in the case.
 
DaveW said:
It should blow OUT the back of the case so it's forced to suck air in thru
all the cracks and openings elsewhere in the case.
Click to expand...

Such as the floppy and CD drive so they fail when they are full of dust.

Your fans should always pull more air into a case than suck out, otherwise
you draw air from other places in your case, filling everything with dust.
 
Phrederick said:
Such as the floppy and CD drive so they fail when they are full of dust.

Your fans should always pull more air into a case than suck out, otherwise
you draw air from other places in your case, filling everything with dust.
Click to expand...

.... and also creating "positive pressure" dead-air spots in your case. This
will result in higher temperatures inside the case. To counter the dust
entering the case, use air filters. Many varieties, kinds, types, and sizes
of filters are available. Put filters on the "into" openings of the case,
blow more air out the back.
This has been argued on several of the case modding sites.
 
... and also creating "positive pressure" dead-air spots in your case. This
will result in higher temperatures inside the case. To counter the dust
entering the case, use air filters. Many varieties, kinds, types, and sizes
of filters are available. Put filters on the "into" openings of the case,
blow more air out the back.
This has been argued on several of the case modding sites.
Click to expand...

You might want to elaborate a bit on what you wrote, as-is it reads
like it's incorrect.


Dave
 
if you're worried about cooling take one of the side panels off Just
remember to clean the inside once in awhile
Click to expand...

I get more dust and stuff in there when the side panel is *on*...
 
Back
Top