Can't see workgroup computer

  • Thread starter Thread starter Lyn
  • Start date Start date
L

Lyn

Hello,

I use ADSL for internet connection. I want to share
internet for another PC. So i set up 2 NIC cards in my PC,
one is go to hub and other for Internet connection. In the
hub, i connect to another PC for internet sharing.

I created to IP address 192.168.1.1 for the NIC that's go
to the hub and give another pc attached with the hub to
192.168.1.01..etc. My problem is that it can see each
other when i use the ping command but can't get Internet
connection and don't even see in the network
neighbourhood. I set up the same workgroup and everything.
Please help !


regards
Lyn
 
Thank you Marina,

The Ip config for 2 nic are
one with internet connection is
217.x.x.97
255.255.248
217.x.x.102

DNS 213.120.62.103
213.120.62.104

The one go to the hub is ,

192.168.1.1 (i created a id address)
255.255.255.0
217.x.x.97 (ip address of the one connected to internet)

DNS server are the same as above.

As for another computer is

192.168.1.20
255.255.255.0
192.168.1.1 (as gateway)

DNS server are the also the same as above.

I can ping to 192.168.1.1 from 192.168.1.20 and vise vias.
But can't get internet connection and can't view in
Networkneighbout hood.

Thank you
Lyn
 
Hi Lyn,

Check the bindingorder of the nics (Network Connections, advanced, advanced)
and make sure the internal nic is on top.
You could also use ICS to get internet working. It has a build-in
DHCP-server.

Marina
 
Back
Top