Can't Open Mixer Volume

  • Thread starter Thread starter RCoen
  • Start date Start date
R

RCoen

My OS has been very stable (latest patches etc applied, no new
software/hardware). When I rightclick on the Sndvol.exe applet in the
SysTrack the menu appears. I can choose Playback, Record, etc. but NOT Open
Volume Mixer. Nor do I see the slider. When I left click on the Open Volume
Mixer it looks like it triggers an Event to the OS, but nothing happens. I
have rebooted (warm & cold) and even Restored to an earlier date without
success.

Any suggestions on how to resolve this?

Thnaks,
Bob
 
Thanks for your reply. Unfortunately neither suggestion worked for me. Any
others would be most appreciated.
 
Colin Barnhorst said:
Are using WLOC by any chance?


Hi, I too have just experienced this problem. It just happened although I had previously re-installed some Pinnacle software. I had left it in the mute mode and first noticed the problem when I tried to unmute and it wouldn't. It's not that i use volume mixer much, it's just annoying that it no longer works. A quick fix would be nice. What it WLOC Colin? Regards, Dave
Click to expand...
 
Further to my last Bob, it would appear that as you suspect the application
does open but does not appear on screen. If you open" task manager" and look
under "processes" you will see "sndvol.exe" is running, this is it. If you
end this process you can then try to open volume mixer again. I have found
that sometimes it will open and sometimes not. This is far from being a cure
for what is a definite problem but it gives you an easier way of trying again
than constantly rebooting.
Regards,
Daveswuk
 
i cant get my speakers to work i done a restore and it quite working i dont know what to do to get it working now could u help me the open volume mixer wont open for me



RCoe wrote:

Can't Open Mixer Volume
03-Mar-08

My OS has been very stable (latest patches etc applied, no new
software/hardware). When I rightclick on the Sndvol.exe applet in the
SysTrack the menu appears. I can choose Playback, Record, etc. but NOT Open
Volume Mixer. Nor do I see the slider. When I left click on the Open Volume
Mixer it looks like it triggers an Event to the OS, but nothing happens. I
have rebooted (warm & cold) and even Restored to an earlier date without
success.

Any suggestions on how to resolve this?

Thnaks,
Bob

Previous Posts In This Thread:

Can't Open Mixer Volume
My OS has been very stable (latest patches etc applied, no new
software/hardware). When I rightclick on the Sndvol.exe applet in the
SysTrack the menu appears. I can choose Playback, Record, etc. but NOT Open
Volume Mixer. Nor do I see the slider. When I left click on the Open Volume
Mixer it looks like it triggers an Event to the OS, but nothing happens. I
have rebooted (warm & cold) and even Restored to an earlier date without
success.

Any suggestions on how to resolve this?

Thnaks,
Bob

Re: Can't Open Mixer Volume
RCoen;633270 Wrote:

Hi Bob,

You might try reinstalling your audio drivers to see if that will fix
the problem. Note, on some audio drivers, you will need to install them
twice to actually install them. Once to remove the old one, twice to
install it.

If that does not help, then see if running a "sfc /scannow" (no quotes)
can find and fix any system file errors that may be the cause. This will
show you how.

http://www.vistax64.com/tutorials/66978-system-files-sfc-command.html

Hope this helps you,
Shawn


--
Brink

*There are no dumb questions, just the people that do not ask them.*
'*Vista x64 Forums*'
(http://www.vistax64.com/index.php?referrerid=2980)
*Please post feedback to help others.*

What happens if you open it from the Control Panel?
What happens if you open it from the Control Panel?

Re: Can't Open Mixer Volume
Same problem, same behavior

:

Thanks for your reply. Unfortunately neither suggestion worked for me.
Thanks for your reply. Unfortunately neither suggestion worked for me. Any
others would be most appreciated.

:

Re: Can't Open Mixer Volume
RCoen;633871 Wrote:

Bob,

The only other thing that I know of to do that is less drastic than a
complete reinstall, is to try a Repair install. This will give you the
details and how to do it.

http://www.vistax64.com/tutorials/88236-repair-install-vista.html

Hope it helps you,
Shawn


--
Brink

*There are no dumb questions, just the people that do not ask them.*
'*Vista x64 Forums*'
(http://www.vistax64.com/index.php?referrerid=2980)
*Please post feedback to help others.*

Are using WLOC by any chance?
Are using WLOC by any chance?

Re: Can't Open Mixer Volume
:

Further to my last Bob, it would appear that as you suspect the application
Further to my last Bob, it would appear that as you suspect the application
does open but does not appear on screen. If you open" task manager" and look
under "processes" you will see "sndvol.exe" is running, this is it. If you
end this process you can then try to open volume mixer again. I have found
that sometimes it will open and sometimes not. This is far from being a cure
for what is a definite problem but it gives you an easier way of trying again
than constantly rebooting.
Regards,
Daveswuk

:

RE: Can't Open Mixer Volume
:

thanks alot daveswuk I was having the same problems and what you have said
has fixed many thanks

Julie

can't open volume mixer
You are required to be a member to post replies. After logging in or becoming a member, you will be redirected back to this page.

open volume nixer
You are required to be a member to post replies. After logging in or becoming a member, you will be redirected back to this page.


Submitted via EggHeadCafe - Software Developer Portal of Choice
Floating box in javascript
http://www.eggheadcafe.com/tutorial...d-1e30f7c68f17/floating-box-in-javascrip.aspx
 
Back
Top