Can't open links

[Linda]

When I'm at a web site I try to click on a link to open up a small window of
information and it won't open. This happens at many web sites - but not
all. My security is set to MEDIUM. I've enabled Java applets. Under the
advanced tab everything under MICROSOFT VM is checked.
If I changed browsers to Firefox, I can open links every where.
Help!
Linda

 

[Robert Aldwinckle]

When I'm at a web site I try to click on a link to open up a small window of
information and it won't open. This happens at many web sites - but not
all. My security is set to MEDIUM. I've enabled Java applets. Under the
advanced tab everything under MICROSOFT VM is checked.
If I changed browsers to Firefox, I can open links every where.
Help!
Linda

Post a sample publicly accessible link.

BTW your OE is quite behind in its maintenance;
so I suspect your IE will be too. Visiting Windows Update
and getting up to date patches would be good for your security
and might be good for solving your problem symptoms too.


HTH

Robert Aldwinckle
---

 

[Bernard S]

I think I have a very similar problem. Embedded links in either OE or IE6
documents will open the browser but hangs on a transparent display window. I
would appreciate being pointing to a solution Thanks

 

[Frank Saunders, MS-MVP OE]

I think I have a very similar problem. Embedded links in either OE
or IE6 documents will open the browser but hangs on a transparent
display window. I would appreciate being pointing to a solution Thanks

From http://www.fjsmjs.com/OE/nolinks.htm

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://inetexplorer.mvps.org/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

6. See Internet Explorer 6.0 Service Pack 1 may display a blank Web page
after you select Auto-Select encoding
http://support.microsoft.com/kb/870863

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/security/protect/default.aspx
http://defendingyourmachine.blogspot.com/

 

[Guest]

From http://www.fjsmjs.com/OE/nolinks.htm

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://inetexplorer.mvps.org/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

6. See Internet Explorer 6.0 Service Pack 1 may display a blank Web page
after you select Auto-Select encoding
http://support.microsoft.com/kb/870863

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/security/protect/default.aspx
http://defendingyourmachine.blogspot.com/

 

[Guest]

From http://www.fjsmjs.com/OE/nolinks.htm

1. Click Start, and then click Run.

2. In the Open box, type:

regsvr32 urlmon.dll

3. Click OK, and then click OK again when you receive the following message:

DllRegisterServer in urlmon.dll succeeded.


4. If that doesn't fix it, see this article:

http://inetexplorer.mvps.org/answers/26.html

5. If you are using WinXP try this:
http://www.mvps.org/sramesh2k/reg/IE_Default_Browser.reg

6. See Internet Explorer 6.0 Service Pack 1 may display a blank Web page
after you select Auto-Select encoding
http://support.microsoft.com/kb/870863

You can also try this:

Go to Start/run, and type SFC (msconfig for WinXP).
Choose 'Extract One File From Installation Disk' ("Expand File" for WinXP).
Type oleaut32.dll, not worrying about its location. Then, click Start.

Next to 'Restore From', type in or browse for the file's location, which is
probably in the Win98 (i386 for WinXP) folder of your installation CD-ROM
(typically D:\Win98), or in your Windows\Options\Cabs (Windows\i386 for
WinXP) folder, as the case may be.

Then, next to 'Save File In', enter C:\Windows\System (C:\Windows\System32
for WinXP), and click OK. System File Checker (or msconfig) looks for the
file, saves it as you requested, and then tells you that 'the file has been
successfully extracted'.

You may need to reboot.

--
Frank Saunders, MS-MVP OE
Please respond in Newsgroup only. Do not send email
http://www.fjsmjs.com
Protect your PC
http://www.microsoft.com./athome/security/protect/default.aspx
http://defendingyourmachine.blogspot.com/

I had a similar problem and tried number 5 just now and it worked. I think I had the problem because I downloaded Firefox browser and then uninstalled.

Thank you very much Frank !
pjban

 

[Frank Saunders, MS-MVP OE]

I had a similar problem and tried number 5 just now and it worked.
I think I had the problem because I downloaded Firefox browser and then
uninstalled.
Thank you very much Frank !
pjban

Thanks for the feedback.