Can't keep table from expanding

  • Thread starter Thread starter Guest
  • Start date Start date
Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt
 
Your TABLE is 309...how can we see it?...anyone can just View Source or open
your page in FP.

ps...Don't drag table or cell borders to resize them.


| Thanks for your reply. I don't get how you saw that my cell was 309 px
wide
| unless you are just measuring it in html. When I open cell properties
there
| is nothing in "specify size" the box has no check mark in it. Therefore I
| understand that to mean that I can move the cell width if I want by
dragging
| the cell margin bar. My cell and table properties are set to default. I
| must be missing something can you explain further?
| Catt
|
| "Stefan B Rusynko" wrote:
|
| > Nothing is wrong w/ your table
| > Your table is 309 px wide w/o any cell size so the cells will adjust to
try to fill the 309 px until all cells have content
| > - you can set cell sizes to prevent that
| > But All table/cell sizes are minimums and the table may adjust to be
larger if your cell content requires a larger table (because
| > the content can't wrap or you insert images that are too large
| >
| > --
| >
| > _____________________________________________
| > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > "Warning - Using the F1 Key will not break anything!" (-;
| > _____________________________________________
| >
| >
| > | I've made allot of tables but I made one today in FP03 and anytime I
try to
| > | type into the first cell the cell expands as soon as I start typing.
Can
| > | someone check it and tell me why it's doing this and how I can correct
it?
| > | Thanks and the link is below.
| > | Catt
| > | http://www.caturner.com/generators_&_lights.htm
| >
| >
| >
 
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

Stefan B Rusynko said:
Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

Ronx said:
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

Stefan B Rusynko said:
Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Can you provide a URL to this page?

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

Ronx said:
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309
px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell
content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Yes, here it is:
http://www.caturner.com/generators_&_lights.htm
Thanks,
Catt

Thomas A. Rowe said:
Can you provide a URL to this page?

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

Ronx said:
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309
px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell
content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Did you try setting a cell width?


| Thanks for all the replies but the point is this table is not reacting the
| same way as all of the other tables I've made in web with FP. I created a
| table with 2 rows and 4 columns wide at 95 percent. In the past when I
start
| typing in the first cell the text would fill the cell up to the margin.
If
| the text filled the line it (FP) would increase the height of the cell and
| not the width. The cell would grow in height and not in width. Thats not
| what's happening here in this table. As soon as I type a letter or letters
in
| to the first cell it drives the right margin of the cell toward the other
| cells squashing them into nothingness. I don't know how to make this more
| clear. There are a few hundred tables in my FP created website. I
created
| each one of them.
| So, again, why is this table not reacting the same?
|
| "Ronx" wrote:
|
| > <table border="1" cellpadding="0" cellspacing="0"
| > style="border-collapse: collapse" width="309">
| >
| > Resizing tables or cells by dragging the borders will set a height
| > attribute for the table as well as the width for the cells. Table
| > height is illegal HTML, and will cause problems in some browsers. Use
| > cell properties to set the width of the cells.
| >
| > Without explicit sizes, cell width will be shared between each cell in
| > proportion to the cells content. A cell with lots of content (compared
| > to other cells in the row) will be given a larger width than cells with
| > little (or no) content.
| > --
| > Ron Symonds - Microsoft MVP (FrontPage)
| > Reply only to group - emails will be deleted unread.
| > FrontPage Support: http://www.frontpagemvps.com/
| > http://www.rxs-enterprises.org/fp
| >
| >
| >
| > | >
| > > Thanks for your reply. I don't get how you saw that my cell was 309
px wide
| > > unless you are just measuring it in html. When I open cell properties
there
| > > is nothing in "specify size" the box has no check mark in it.
Therefore I
| > > understand that to mean that I can move the cell width if I want by
dragging
| > > the cell margin bar. My cell and table properties are set to default.
I
| > > must be missing something can you explain further?
| > > Catt
| > >
| > > "Stefan B Rusynko" wrote:
| > >
| > > > Nothing is wrong w/ your table
| > > > Your table is 309 px wide w/o any cell size so the cells will adjust
to try to fill the 309 px until all cells have content
| > > > - you can set cell sizes to prevent that
| > > > But All table/cell sizes are minimums and the table may adjust to be
larger if your cell content requires a larger table (because
| > > > the content can't wrap or you insert images that are too large
| > > >
| > > > --
| > > >
| > > > _____________________________________________
| > > > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| > > > "Warning - Using the F1 Key will not break anything!" (-;
| > > > _____________________________________________
| > > >
| > > >
| > > > | I've made allot of tables but I made one today in FP03 and anytime
I try to
| > > > | type into the first cell the cell expands as soon as I start
typing. Can
| > > > | someone check it and tell me why it's doing this and how I can
correct it?
| > > > | Thanks and the link is below.
| > > > | Catt
| > > > | http://www.caturner.com/generators_&_lights.htm
| > > >
| > > >
| > > >
| >
| >
 
If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

Ronx said:
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
When I type in one letter into the first cell the cell margin moves over in
spaces of about 25 pixels! It almost looks like its 'tabbing'. Please, just
go to the url and type into the first cell and you'll see what I mean. Table
is at the bottom of the page. This is not the way my other dozens of tables
acted.
Maybe there is something wrong with my program?
Catt

Ronx said:
If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

Ronx said:
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Change
<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">
<tr>
<td>&nbsp;</td>
<td>&nbsp;</td>
</tr>
<tr>
<td>&nbsp;</td>
<td>&nbsp;</td>
</tr>
</table>

To

<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">
<tr>
<td width="50%">&nbsp;</td>
<td width="50%">&nbsp;</td>
</tr>
<tr>
<td>&nbsp;</td>
<td>&nbsp;</td>
</tr>
</table>


And the cell widths will not resize.
Leave it as it is, and the cells will adjust in width according to how
much content is in each column. If one column is virtually empty, it
will become very narrow as the other column fills up. This is how HTML
works. Add content to both columns, and the cells will adjust their
widths so that the table height is minimised - the column with most
content will be wider than the other.

If you other tables were constructed as this one is, then they worked
the same way. However, I suspect your other tables had cells with
sizes. The tables on http://www.caturner.com/catalogindex.htm have the
width attribute in the cells, which the table on
http://www.caturner.com/generators_&_lights.htm does not.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



When I type in one letter into the first cell the cell margin moves over in
spaces of about 25 pixels! It almost looks like its 'tabbing'. Please, just
go to the url and type into the first cell and you'll see what I mean. Table
is at the bottom of the page. This is not the way my other dozens of tables
acted.
Maybe there is something wrong with my program?
Catt

Ronx said:
If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

:

<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the 309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Select both columns, then under Cell Properties, set the width to 50%.

Which will result in the following:

<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" width="309">
<tr>
<td width="50%">&nbsp;</td>
<td width="50%">&nbsp;</td>
</tr>
<tr>
<td width="50%">&nbsp;</td>
<td width="50%">&nbsp;</td>
</tr>
</table>

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
When I type in one letter into the first cell the cell margin moves over in
spaces of about 25 pixels! It almost looks like its 'tabbing'. Please, just
go to the url and type into the first cell and you'll see what I mean. Table
is at the bottom of the page. This is not the way my other dozens of tables
acted.
Maybe there is something wrong with my program?
Catt

Ronx said:
If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp



Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

:

<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the
309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell
content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
Thanks to Rowe and Ronx you both nailed it. The short answer was that the
cells in the default table were set to "pixels" intead of "percent". Somehow
or someway unknown to me the table default settings were changed. I'm sure
they didn't switch on their own so it was something I did and didn't realize.
Thanks for all the replies and help.
Catt

Thomas A. Rowe said:
Select both columns, then under Cell Properties, set the width to 50%.

Which will result in the following:

<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" width="309">
<tr>
<td width="50%"> </td>
<td width="50%"> </td>
</tr>
<tr>
<td width="50%"> </td>
<td width="50%"> </td>
</tr>
</table>

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
When I type in one letter into the first cell the cell margin moves over in
spaces of about 25 pixels! It almost looks like its 'tabbing'. Please, just
go to the url and type into the first cell and you'll see what I mean. Table
is at the bottom of the page. This is not the way my other dozens of tables
acted.
Maybe there is something wrong with my program?
Catt

Ronx said:
If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

:

<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill the
309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your cell
content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
This happens any time you drag the table/cells with the mouse.

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
Thanks to Rowe and Ronx you both nailed it. The short answer was that the
cells in the default table were set to "pixels" intead of "percent". Somehow
or someway unknown to me the table default settings were changed. I'm sure
they didn't switch on their own so it was something I did and didn't realize.
Thanks for all the replies and help.
Catt

Thomas A. Rowe said:
Select both columns, then under Cell Properties, set the width to 50%.

Which will result in the following:

<table border="1" cellpadding="0" cellspacing="0" style="border-collapse: collapse" width="309">
<tr>
<td width="50%"> </td>
<td width="50%"> </td>
</tr>
<tr>
<td width="50%"> </td>
<td width="50%"> </td>
</tr>
</table>

--
==============================================
Thomas A. Rowe
Microsoft MVP - FrontPage

http://www.Ecom-Data.com
==============================================


Catt said:
When I type in one letter into the first cell the cell margin moves over in
spaces of about 25 pixels! It almost looks like its 'tabbing'. Please, just
go to the url and type into the first cell and you'll see what I mean. Table
is at the bottom of the page. This is not the way my other dozens of tables
acted.
Maybe there is something wrong with my program?
Catt

:

If you put content in the other cells, they will sort themselves out.
Or, set cell sizes as well as the table size. Use cell properties to
set the cell sizes.

Your table is behaving exactly as it should.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for all the replies but the point is this table is not reacting the
same way as all of the other tables I've made in web with FP. I created a
table with 2 rows and 4 columns wide at 95 percent. In the past when I start
typing in the first cell the text would fill the cell up to the margin. If
the text filled the line it (FP) would increase the height of the cell and
not the width. The cell would grow in height and not in width. Thats not
what's happening here in this table. As soon as I type a letter or letters in
to the first cell it drives the right margin of the cell toward the other
cells squashing them into nothingness. I don't know how to make this more
clear. There are a few hundred tables in my FP created website. I created
each one of them.
So, again, why is this table not reacting the same?

:

<table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">

Resizing tables or cells by dragging the borders will set a height
attribute for the table as well as the width for the cells. Table
height is illegal HTML, and will cause problems in some browsers. Use
cell properties to set the width of the cells.

Without explicit sizes, cell width will be shared between each cell in
proportion to the cells content. A cell with lots of content (compared
to other cells in the row) will be given a larger width than cells with
little (or no) content.
--
Ron Symonds - Microsoft MVP (FrontPage)
Reply only to group - emails will be deleted unread.
FrontPage Support: http://www.frontpagemvps.com/
http://www.rxs-enterprises.org/fp




Thanks for your reply. I don't get how you saw that my cell was 309 px wide
unless you are just measuring it in html. When I open cell properties there
is nothing in "specify size" the box has no check mark in it. Therefore I
understand that to mean that I can move the cell width if I want by dragging
the cell margin bar. My cell and table properties are set to default. I
must be missing something can you explain further?
Catt

:

Nothing is wrong w/ your table
Your table is 309 px wide w/o any cell size so the cells will adjust to try to fill
the
309 px until all cells have content
- you can set cell sizes to prevent that
But All table/cell sizes are minimums and the table may adjust to be larger if your
cell
content requires a larger table (because
the content can't wrap or you insert images that are too large

--

_____________________________________________
SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
"Warning - Using the F1 Key will not break anything!" (-;
_____________________________________________


| I've made allot of tables but I made one today in FP03 and anytime I try to
| type into the first cell the cell expands as soon as I start typing. Can
| someone check it and tell me why it's doing this and how I can correct it?
| Thanks and the link is below.
| Catt
| http://www.caturner.com/generators_&_lights.htm
 
deja vu


| This happens any time you drag the table/cells with the mouse.
|
| --
| ==============================================
| Thomas A. Rowe
| Microsoft MVP - FrontPage
|
| http://www.Ecom-Data.com
| ==============================================
|
|
| | > Thanks to Rowe and Ronx you both nailed it. The short answer was that
the
| > cells in the default table were set to "pixels" intead of "percent".
Somehow
| > or someway unknown to me the table default settings were changed. I'm
sure
| > they didn't switch on their own so it was something I did and didn't
realize.
| > Thanks for all the replies and help.
| > Catt
| >
| > "Thomas A. Rowe" wrote:
| >
| >> Select both columns, then under Cell Properties, set the width to 50%.
| >>
| >> Which will result in the following:
| >>
| >> <table border="1" cellpadding="0" cellspacing="0"
style="border-collapse: collapse" width="309">
| >> <tr>
| >> <td width="50%"> </td>
| >> <td width="50%"> </td>
| >> </tr>
| >> <tr>
| >> <td width="50%"> </td>
| >> <td width="50%"> </td>
| >> </tr>
| >> </table>
| >>
| >> --
| >> ==============================================
| >> Thomas A. Rowe
| >> Microsoft MVP - FrontPage
| >>
| >> http://www.Ecom-Data.com
| >> ==============================================
| >>
| >>
| >> | >> > When I type in one letter into the first cell the cell margin moves
over in
| >> > spaces of about 25 pixels! It almost looks like its 'tabbing'.
Please, just
| >> > go to the url and type into the first cell and you'll see what I
mean. Table
| >> > is at the bottom of the page. This is not the way my other dozens of
tables
| >> > acted.
| >> > Maybe there is something wrong with my program?
| >> > Catt
| >> >
| >> > "Ronx" wrote:
| >> >
| >> >> If you put content in the other cells, they will sort themselves
out.
| >> >> Or, set cell sizes as well as the table size. Use cell properties
to
| >> >> set the cell sizes.
| >> >>
| >> >> Your table is behaving exactly as it should.
| >> >> --
| >> >> Ron Symonds - Microsoft MVP (FrontPage)
| >> >> Reply only to group - emails will be deleted unread.
| >> >> FrontPage Support: http://www.frontpagemvps.com/
| >> >> http://www.rxs-enterprises.org/fp
| >> >>
| >> >>
| >> >>
| >> >> | >> >>
| >> >> > Thanks for all the replies but the point is this table is not
reacting the
| >> >> > same way as all of the other tables I've made in web with FP. I
created a
| >> >> > table with 2 rows and 4 columns wide at 95 percent. In the past
when I start
| >> >> > typing in the first cell the text would fill the cell up to the
margin. If
| >> >> > the text filled the line it (FP) would increase the height of the
cell and
| >> >> > not the width. The cell would grow in height and not in width.
Thats not
| >> >> > what's happening here in this table. As soon as I type a letter or
letters in
| >> >> > to the first cell it drives the right margin of the cell toward
the other
| >> >> > cells squashing them into nothingness. I don't know how to make
this more
| >> >> > clear. There are a few hundred tables in my FP created website.
I created
| >> >> > each one of them.
| >> >> > So, again, why is this table not reacting the same?
| >> >> >
| >> >> > "Ronx" wrote:
| >> >> >
| >> >> > > <table border="1" cellpadding="0" cellspacing="0"
| >> >> > > style="border-collapse: collapse" width="309">
| >> >> > >
| >> >> > > Resizing tables or cells by dragging the borders will set a
height
| >> >> > > attribute for the table as well as the width for the cells.
Table
| >> >> > > height is illegal HTML, and will cause problems in some
browsers. Use
| >> >> > > cell properties to set the width of the cells.
| >> >> > >
| >> >> > > Without explicit sizes, cell width will be shared between each
cell in
| >> >> > > proportion to the cells content. A cell with lots of content
(compared
| >> >> > > to other cells in the row) will be given a larger width than
cells with
| >> >> > > little (or no) content.
| >> >> > > --
| >> >> > > Ron Symonds - Microsoft MVP (FrontPage)
| >> >> > > Reply only to group - emails will be deleted unread.
| >> >> > > FrontPage Support: http://www.frontpagemvps.com/
| >> >> > > http://www.rxs-enterprises.org/fp
| >> >> > >
| >> >> > >
| >> >> > >
| >> >> > > | >> >> > >
| >> >> > > > Thanks for your reply. I don't get how you saw that my cell
was 309 px wide
| >> >> > > > unless you are just measuring it in html. When I open cell
properties there
| >> >> > > > is nothing in "specify size" the box has no check mark in it.
Therefore I
| >> >> > > > understand that to mean that I can move the cell width if I
want by dragging
| >> >> > > > the cell margin bar. My cell and table properties are set to
default. I
| >> >> > > > must be missing something can you explain further?
| >> >> > > > Catt
| >> >> > > >
| >> >> > > > "Stefan B Rusynko" wrote:
| >> >> > > >
| >> >> > > > > Nothing is wrong w/ your table
| >> >> > > > > Your table is 309 px wide w/o any cell size so the cells
will adjust to try to fill
| >> >> > > > > the
| >> >> > > > > 309 px until all cells have content
| >> >> > > > > - you can set cell sizes to prevent that
| >> >> > > > > But All table/cell sizes are minimums and the table may
adjust to be larger if your
| >> >> > > > > cell
| >> >> > > > > content requires a larger table (because
| >> >> > > > > the content can't wrap or you insert images that are too
large
| >> >> > > > >
| >> >> > > > > --
| >> >> > > > >
| >> >> > > > > _____________________________________________
| >> >> > > > > SBR @ ENJOY (-: [ Microsoft MVP - FrontPage ]
| >> >> > > > > "Warning - Using the F1 Key will not break anything!" (-;
| >> >> > > > > _____________________________________________
| >> >> > > > >
| >> >> > > > >
| >> >> > > > > | >> >> > > > > | I've made allot of tables but I made one today in FP03 and
anytime I try to
| >> >> > > > > | type into the first cell the cell expands as soon as I
start typing. Can
| >> >> > > > > | someone check it and tell me why it's doing this and how I
can correct it?
| >> >> > > > > | Thanks and the link is below.
| >> >> > > > > | Catt
| >> >> > > > > | http://www.caturner.com/generators_&_lights.htm
| >> >> > > > >
| >> >> > > > >
| >> >> > > > >
| >> >> > >
| >> >> > >
| >> >>
| >> >>
| >>
| >>
| >>
|
|
 
Back
Top