Cant install Windows Vista Home Premium 64 with 4GB memory

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have a big problem.

I cant install Vista on my computer with 4x1024mb Ram.
I got bluescreens !

If i take out one of the memory, and run with 3x1024 all works fine,
but, if i after the Vista installation is complete, put in the 4'th memory
again, the Bluescreen is there.

The memory is Corsair Twinx2048-6400
Motherboard Asus M32N-SLI Deluxe
 
Peter said:
I have a big problem.

I cant install Vista on my computer with 4x1024mb Ram.
I got bluescreens !

If i take out one of the memory, and run with 3x1024 all works fine,
but, if i after the Vista installation is complete, put in the 4'th memory
again, the Bluescreen is there.

The memory is Corsair Twinx2048-6400
Motherboard Asus M32N-SLI Deluxe
Click to expand...

Why in the world do you need 4 gigs of RAM?

Alias
 
Almost sounds like one of the ram sticks is faulty. Can you swap them
around, maybe put the one you took out, back in and take one of the other
ones out.
Or try memtest.
 
I had the same problem with my Asus M2N SLI Deluxe
Go into the BIOS and set the memory voltage manually.
 
I thought Vista was going to support huge amounts of RAM, many times more
than even 4GB. Is that not the case?

And I can think of a lot of reasons for having more than 4 GB of RAM. Video
editing for one. Don't some digital video camera create about 1 GB of data
per minute?

Dale
 
Peter, I don't know if your ASUS MB has this same BIOS setting as my ASUS P5B
Deluxe WiFi-AP MB: "Memory Remap Feature" - if it does, this feature must be
enabled for x64 OS to recignize all 4GB of memory (or most of it).

I have successfully installed Vista Ultimate x64 (RTM Build 6000) on 2
different computers, each with 4GB of memory.

Here's my experience: http://byooc.blogspot.com/2007/01/on-bleeding-edge.html

Hope this helps.
 
I tryed to do that but dosent find any settings that works.

The system with 4GB runs fine with Windows XP 32
 
Here is why I run 4gig.
I need to test some processes for work so I run VMWare server software on my
machine.
It allows me to run a SQL server with 2 gig memory. Two more workstations
512 each and my main machine.
All at the same time.
 
Peter--

Whatever the problem is, I doubt the extra RAM. Maybe you have a bad memory
stick. Is it feasible to exchange it for another one? Does this go if you
take out one particular memory stick or any of them?

CH
 
I dosent matter witch memory i take out.


Chad Harris said:
Peter--

Whatever the problem is, I doubt the extra RAM. Maybe you have a bad memory
stick. Is it feasible to exchange it for another one? Does this go if you
take out one particular memory stick or any of them?

CH
Click to expand...
 
Your mobo has a bug in the BIOS. If a BIOS update addressing this is not
out yet you will have to wait to use the full ram until one is. I have the
same issue.
 
Even if it works fine in XP pro (not64bit)

Colin Barnhorst said:
Your mobo has a bug in the BIOS. If a BIOS update addressing this is not
out yet you will have to wait to use the full ram until one is. I have the
same issue.
Click to expand...
 
Bob said:
Here is why I run 4gig.
I need to test some processes for work so I run VMWare server software
on my machine.
It allows me to run a SQL server with 2 gig memory. Two more
workstations 512 each and my main machine.
All at the same time.
Click to expand...

Good reason, point taken.

Alias
 
With 6400 ram, XP x86 will not blue screen but you may have occasional
instability. XP Pro x64 will blue screen on you with 4GB of 6400 ram.
Vista x64 will blue screen on you with 4GB of 6400 ram.

The faster the ram you use the more you will have BIOS related problems. It
is possible that 4GB of slower ram will resolve your issue, but that is
related to timing issues stemming from the bugs in the BIOS.
 
Peter


This is a Bios related problem. Check your Bios compatibility. The need for RAM is different in XP and in Vista
 
Back
Top