Can't install win2k or winxp - screen goes blank!!

  • Thread starter Thread starter guy
  • Start date Start date
G

guy

Originally my computer had win2k installed. One day when I boot it up, the
normal screens appear up to the point where the win2k appears.
Then the screen starts to blink and finally goes blank and dark, and I can
do nothing to bring it on but SWITCH OFF the computer (nothing appears on
the screen even restart). But the same thing happens again when I turned on
the computer ...
I had boot with safe mode, still same...

At last I boot it with win2k CD and format my C:(NTFS), while D:(FAT32) and
E:(FAT32) remain...
I tried to reinstall win2k again, but this time during the installation auto
reboot process when the win2k logo was about to appear...the screen goes
blank and dark and I must switch off the computer again.
Then I boot with winxp and format C: again and tried to install winxp....but
the same thing happened.

I scan the disk with hdd regenerator, no bad sector was found...
Is it caused by the power supply? motherboard? virus?

ps: my computer somtimes "self reboots" after running for a few
hours...somtimes even twenty minutes or so....

Please help!!
Many Thanks!!
 
Two posibilities... maybe...

Change video card (might have gone bad or is not supported)

Change memory chip (might be bad).

-Frank
 
Agree with Frank. You have some bad hardware.

--

Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft Certified Professional
Microsoft MVP [Windows]
http://www.microsoft.com/protect

:
| Originally my computer had win2k installed. One day when I boot it up, the
| normal screens appear up to the point where the win2k appears.
| Then the screen starts to blink and finally goes blank and dark, and I can
| do nothing to bring it on but SWITCH OFF the computer (nothing appears on
| the screen even restart). But the same thing happens again when I turned
on
| the computer ...
| I had boot with safe mode, still same...
|
| At last I boot it with win2k CD and format my C:(NTFS), while D:(FAT32)
and
| E:(FAT32) remain...
| I tried to reinstall win2k again, but this time during the installation
auto
| reboot process when the win2k logo was about to appear...the screen goes
| blank and dark and I must switch off the computer again.
| Then I boot with winxp and format C: again and tried to install
winxp....but
| the same thing happened.
|
| I scan the disk with hdd regenerator, no bad sector was found...
| Is it caused by the power supply? motherboard? virus?
|
| ps: my computer somtimes "self reboots" after running for a few
| hours...somtimes even twenty minutes or so....
|
| Please help!!
| Many Thanks!!
|
|
 
THANKS!!!!!

I have tried a program called MEMTEST to check the memory...but it seems too
complicated....
is there other more user-friendly software that can check memory chip?

My video card is onboard...how can I check if it is good or bad?
 
I'm not familiar with memory checking software... but there's a few out
there. Nothing beats a physical change though... if you can do it.

For the Video... you'll just have to find a plug in video card, install it
and try it. Almost any recent video card will do. I'm suspecting that one
"mode" of your video card has gone bad (very common to have one mode go bad
while the others continue to work). When Windows first boots, it changes the
mode of your video a couple of times. Sounds very possible that one of these
automatic changes of mode is not working on your video board.

-Frank
 
Back
Top