Can't get volume icon to stay in task bar

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I can't get the volume icon to stay in the task bar. It used to be there but
when I reformatted my hard drive it went away. I have checked the box "Place
volume icon in the taskbar". Everytime I reboot the icon disapears.

Can anyone help?
Dave
 
Are your sound drivers loaded correctly.....

IE no exclamation mark next to the sound driver in device manager......
 
Paul,
Thank you for your response.
The drivers are loaded properly. No exclamation marks. I can play music and
sounds of all sorts.

Dave
 
Are you running Norton systermworks 2005, I have this problem on one
machine, when I turn off turn volume control comes back. But this has only
happened on this machine have not seen it on any other machine.
 
JoeM,

No I'm not. The only Norton product I was using is Antivirus 2004. I dumped
it in favor of Panda Titanium Antivirus 2005. Perhaps I need to uninstall it
and see if it has any effect.

Dave
 
What programs are you running. Did your sound card come with software, did
you install it?
There is some software that use their own volume control, and they sometime
try to shut off the windows volume control.
 
JoeM,
I have lots of programs but I am assuming that you want to know what audio
programs I have.
Adaptec Roxio East CD Creator 5.3.5
Adobe Audition 1.0
Azureus 2
CD Trustee 2.03
Lime Wire 1.0.0.2
Real Player 10.5
Winamp 5.092
Windows Media Player 9.0

My sound card was factory installed. I've checked for driver updates and
found none.

Dave
 
wpsnts said:
Nothing has worked. Any other ideas?

Dave
Click to expand...

Have you read these?

http://support.microsoft.com/default.aspx?scid=kb;en-us;245692

http://support.microsoft.com/default.aspx?scid=kb;en-us;319095


You didn't mention getting any error messages, but since I was there, I
thought I would send that last one along anyway. :)

And this from the MSDN library just FYI:

SysTray and SndVol32
[This is preliminary documentation and subject to change.]

The SndVol32 program (sndvol32.exe) controls both the volume settings for
various sound sources (such as wave, CD, and synthesizer) and the master
volume setting. The SndVol32 program is represented as a speaker icon that
appears in the system-tray notification area the taskbar, which appears in
the bottom-right corner of the Windows screen by default.

The SysTray program (systray.exe) is responsible for displaying the speaker
icon when it is turned on and for hiding the speaker icon when it is turned
off. In Windows XP, the speaker icon is hidden by default. In all other
Windows versions, including Windows XP SP1, the speaker icon is visible by
default.

In Windows XP, follow these steps to display the speaker icon on the taskbar:

1. In Control Panel, click the Sounds and Audio Devices icon (or simply
run mmsys.cpl).
2. On the Volume tab, select the Place volume icon in the taskbar check box.

If your sound card's volume level can be changed under software control, a
speaker icon appears on the taskbar. You can change the master-volume
setting by single-clicking on that icon and adjusting the volume slider.

At logon time, SysTray queries the audio driver for a mixer line with a
MIXERLINE_COMPONENTTYPE_DST_SPEAKERS (speaker destination) or
MIXERLINE_COMPONENTTYPE_DST_HEADPHONES (headphone destination) component
type to determine whether the speaker icon should be displayed. If neither
of these component types is found, SysTray does not display the speaker
icon. If it does find the line, it queries the line to determine whether it
contains a mute control. SysTray completes its logon-time mixer-line
processing by internally storing the line ID and mute control ID for future
reference.


Good luck! Hope you find the answer soon.
bj
 
I am sorry that I am not seeing anything I will look around and see if a see
anything else. Hope you find the solution.
 
chicagofan,

I hadn't seen the first notice before. I tried it and don't see
"SysTray.exe" listed. Perhaps that is why I have this problem. Would you know
how I get it onto the list?

The second notice I have tried before. When I enter the second line of the
comand it says that it cannot find the path. So I just give up in
frustration. I am no computer expert but I am not afraid to try If I have
instuctions.
Also I have not gotten any error messages in regards to the icon.
 
wpsnts said:
I hadn't seen the first notice before. I tried it and don't see
"SysTray.exe" listed. Perhaps that is why I have this problem. Would you know
how I get it onto the list?
Click to expand...

It's no wonder... sorry I wasted your time! That doesn't work for XP, and I
assume that is what you are using. I checked my Start Up list to see what I
had, and when I found out I didn't have a separate listing in my start up
group either, I went back to check the MS web site. It only applies up to
WinME. Are you using XP.2?

If we only knew where that is buried now, we might be on to something. ;)
I'll keep looking for some *useful* information, so be sure to post if you
solve it on your own soon. Others would probably find it useful information
too, because you aren't the only one who has had this problem. Once again,
sorry I didn't check out the bottom of the page. I keep forgetting MS
doesn't separate the solutions by OS. :\
bj
 
wpsnts said:
<>
The second notice I have tried before. When I enter the second line of the
comand it says that it cannot find the path. So I just give up in
frustration. I am no computer expert but I am not afraid to try If I have
instuctions.
Click to expand...


Are these the instructions that you followed, and it aborted on you? I
found the duplicate instructions confusing, and eliminated the first set
below. Read these and see if this is what you did... that did not work.
bj

-----
RESOLUTION

To resolve this issue, extract a new copy of Sndvol32.exe from the Windows
XP compact disc to the system_root\System32 folder on your computer's hard
disk. To do this, follow these steps:

1. Insert the Windows XP CD-ROM into your computer's CD-ROM or DVD-ROM
drive. Press and hold down the SHIFT key as you insert the CD-ROM to prevent
it from starting automatically.
2. Click Start, and then click Run.
3. In the Open box, type cmd, and then click OK.
4. Type the following lines at the command prompt, pressing ENTER after each
line.

[Note there is a space between "ex_" and "system_root" in this command.]

For example, if your computer's CD-ROM drive is drive E,
and the folder that contains the Windows system files is C:\Windows,
type the following, at the command prompt(pressing ENTER after each line):

e:
cd i386
expand sndvol32.ex_ c:\windows\system32\sndvol32.exe

5. Type exit to quit the command prompt.
6. Verify that you can start Volume Control and that the Volume icon is
displayed in the notification area (if you selected this option).



------

MORE INFORMATION
By default, the Volume icon is not displayed in the notification area in
Windows XP.

For additional information about how to display the volume control icon in
the notification area, click the article number below to view the article in
the Microsoft Knowledge Base:
279435 HOW TO: Display the Volume Icon in the Notification Area in Windows

For additional information about icons that are displayed in the
notification area, click the article number below to view the article in the
Microsoft Knowledge Base:
310578 Windows System Tray Icons

For additional information about how to troubleshoot sound problems, click
the article number below to view the article in the Microsoft Knowledge Base:
307918 HOW TO: Resources for Troubleshooting Sound Problems in Windows XP
 
Readers:
Re bj's reply: I have curently no sound from WMP and my Dart Sound
Restoration software, etc. Formerly driling buzzing sounds instead of music.
My spkrs and sndcard are OK. Windows earlier blew off SndVol32.exe, and
advises me to reinstall it via my XP ADD/REMOVE program. 1)Where do I find
that file on my XP CD-ROM? 2)How in the hell do I get it in there, since the
thing adds/removes programs, and not indiv. files, as far as i can see. Tried
the bj thing, but kept geting a "the device is not ready" msg after I typed
in my Drive letter. Any helpful sugestions?
--
Jack Sanders


chicagofan said:
wpsnts said:
Nothing has worked. Any other ideas?

Dave
Click to expand...

Have you read these?

http://support.microsoft.com/default.aspx?scid=kb;en-us;245692

http://support.microsoft.com/default.aspx?scid=kb;en-us;319095


You didn't mention getting any error messages, but since I was there, I
thought I would send that last one along anyway. :)

And this from the MSDN library just FYI:

SysTray and SndVol32
[This is preliminary documentation and subject to change.]

The SndVol32 program (sndvol32.exe) controls both the volume settings for
various sound sources (such as wave, CD, and synthesizer) and the master
volume setting. The SndVol32 program is represented as a speaker icon that
appears in the system-tray notification area the taskbar, which appears in
the bottom-right corner of the Windows screen by default.

The SysTray program (systray.exe) is responsible for displaying the speaker
icon when it is turned on and for hiding the speaker icon when it is turned
off. In Windows XP, the speaker icon is hidden by default. In all other
Windows versions, including Windows XP SP1, the speaker icon is visible by
default.

In Windows XP, follow these steps to display the speaker icon on the taskbar:

1. In Control Panel, click the Sounds and Audio Devices icon (or simply
run mmsys.cpl).
2. On the Volume tab, select the Place volume icon in the taskbar check box.

If your sound card's volume level can be changed under software control, a
speaker icon appears on the taskbar. You can change the master-volume
setting by single-clicking on that icon and adjusting the volume slider.

At logon time, SysTray queries the audio driver for a mixer line with a
MIXERLINE_COMPONENTTYPE_DST_SPEAKERS (speaker destination) or
MIXERLINE_COMPONENTTYPE_DST_HEADPHONES (headphone destination) component
type to determine whether the speaker icon should be displayed. If neither
of these component types is found, SysTray does not display the speaker
icon. If it does find the line, it queries the line to determine whether it
contains a mute control. SysTray completes its logon-time mixer-line
processing by internally storing the line ID and mute control ID for future
reference.


Good luck! Hope you find the answer soon.
bj
Click to expand...
 
WPSNTS, I can so relate to your frustration since I have had the same problem
for a long time. Regardless of the fixes recommended, I found that the
problem began after I installed SP1 for XP Pro. I queried MS via email and
was told that MS is aware that the SP may create this problem. I even went
so far as uninstalling the SP and when I did, the icon was back. But
uninstalling the SP created more problems than I had before (with Office and
other programs). So I reinstalled it and never resolved the icon problem. It
disappeared again when I reinstalled the SP. Not sure there is a workable
fix for this yet. I'll keep checking this board in hopes that someone can
offer a solution that works.
 
Back
Top