Can't get access anything in my profile in another partition

  • Thread starter Thread starter Annoyed
  • Start date Start date
A

Annoyed

Some time ago I decided to buy a new PC. Prior to that I
had upgraded my HDD to an 80Gb model, and installed WINXP
PRO on it. The PC was an older Pentium 200MMX and I had
to limit the drive to 32Gb. When I bought my new PC I
used my 80Gb and removed the 32Gb jumper. I installed
WINXP PRO on the remainder of the HDD on a second
partition. I can now access everything on the original
partition, but nothing that exists in any of the user
profiles. This is bad. I need those files (particularly)
in My Documents. I still have the old PC (I've been
reluctant to give it away in case I needed it to recover
the files - which I suspect I do). I have tried putting
the drive back into the old PC and booting into the 1st
partition but Windows fails to boot. I suspect a change
to the MBR might fix this but I'm not sure. Can anyone
tell me how to get my files off the 1st partition and
somewhere I can access them? I fear my wife may have me
executed at a public trial if I can't recover the
pregnancy journal whe kept for the last nine months!
HELP!!
 
This sounds like a file ownership issue related to NTFS. Note, file
ownership and permissions supersede administrator rights. How you resolve
it depends upon which version of XP you are running.



XP-Home



Unfortunately, XP Home using NTFS is essentially hard wired for "Simple File
Sharing" at system level.

However, you can set XP Home permissions in Safe Mode. Reboot, and start
hitting F8, a menu should eventually appear and one of the
options is Safe Mode. Select it. Note, it will ask for the administrator's
password. This is not your administrator account, rather it is the
machine's administrator account for which users are asked to create a
password during setup.

If you created no such password, when requested, leave blank and press
enter.

Open Explorer, go to Tools and Folder Options, on the view tab, scroll to
the bottom of the list, if it shows "Enable Simple File Sharing" deselect it
and click apply and ok. If it shows nothing or won't let you make a change,
move on to the next step.

Navigate to the files, right click, select properties, go to the Security
tab, click advanced, go to the Owner tab and select the user that was logged
on when you were refused permission to access the files. Click apply and
ok. Close the properties box, reopen it, click add and type in the name of
the user you just enabled. If you wish to set ownership for everything in
the folder, at the bottom of the Owner tab is the following selection:
"Replace owner on subcontainers and objects," select it as well.

Once complete, you should be able to do what you wish with these files when
you log back on as that user.



XP-Pro



If you have XP Pro, temporarily change the limited account to
administrative. First, go to Windows Explorer, go to Tools, select Folder
Options, go to the View tab and be sure "Use Simple File Sharing" is not
selected. If it is, deselect it and click apply and ok.



If you wish everything in a specific folder to be accessible to a user,
right click the folder, select properties, go to the Security tab, click
Advanced, go to the Owner tab,
select the user you wish to have access, at the bottom of the box, you
should see a check box for "Replace owner on subcontainers and objects,"
place a check in the box and click apply and ok.

The user should now be able to perform necessary functions on files in the
folder even as a limited account. If not, make it an admin account again,
right click the folder, select Properties, go to the Security tab and be
sure the user is listed in the user list. If not, click add and type the
user name in the appropriate box, be sure the user has all the necessary
permissions checked in the permission list below the user list, click apply
and ok.

That should do it and allow whatever access you desire for that folder even
in a limited account.
 
It worked - thanks so very much! You have no idea how
much pain and time your resolution has saved me. I had no
idea it was this simple. Thanks again.
 
Back
Top