Can't find medctroc.inf to open remove WXP component

[Guest]

I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Unknown]

Search google for medctroc and you'll have all the info you need.

 

[Guest]

Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

 

[Ramesh, MS-MVP]

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

 

[Guest]

Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

Search google for medctroc and you'll have all the info you need.

 

[Ramesh, MS-MVP]

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

Search google for medctroc and you'll have all the info you need.

 

[Guest]

I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Guest]

P.S. I inserted the XP installation disc and clicked on "add additional
windows components" and I got the same error message.

I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Ramesh, MS-MVP]

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Guest]

Thanks for bearing with me:
Before I begin is this the correct command:
expand E:\i386\sysoc.in_ -r c:\windows\ehome

where E is my cd drive and c is where windows is located.
Thanks again!

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Ramesh, MS-MVP]

"sysoc.in_" was provided in the link as an example. In your case, it would be "medctroc.dl_"

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for bearing with me:
Before I begin is this the correct command:
expand E:\i386\sysoc.in_ -r c:\windows\ehome

where E is my cd drive and c is where windows is located.
Thanks again!

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Guest]

Thanks again! I extracted it into c:\windows\ehome and it went there(it's
the only file in that folder now, incidentally),but I still get the same
error message. What about the other part of the error message.... can't load
MedCtrOciSetupproc...
Do I have to find that exract it and put it somewhere.
Thanks
chas

"sysoc.in_" was provided in the link as an example. In your case, it would be "medctroc.dl_"

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for bearing with me:
Before I begin is this the correct command:
expand E:\i386\sysoc.in_ -r c:\windows\ehome

where E is my cd drive and c is where windows is located.
Thanks again!

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

:

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Ramesh, MS-MVP]

Hi ChasX,

My mistake! You need to place the file here:

C:\Windows\System32\Setup

Move it from "c:\windows\ehome" to the above location.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks again! I extracted it into c:\windows\ehome and it went there(it's
the only file in that folder now, incidentally),but I still get the same
error message. What about the other part of the error message.... can't load
MedCtrOciSetupproc...
Do I have to find that exract it and put it somewhere.
Thanks
chas

"sysoc.in_" was provided in the link as an example. In your case, it would be "medctroc.dl_"

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for bearing with me:
Before I begin is this the correct command:
expand E:\i386\sysoc.in_ -r c:\windows\ehome

where E is my cd drive and c is where windows is located.
Thanks again!

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

:

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Guest]

THANK YOU Ramesh! It worked perfectly.
Chas

Hi ChasX,

My mistake! You need to place the file here:

C:\Windows\System32\Setup

Move it from "c:\windows\ehome" to the above location.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks again! I extracted it into c:\windows\ehome and it went there(it's
the only file in that folder now, incidentally),but I still get the same
error message. What about the other part of the error message.... can't load
MedCtrOciSetupproc...
Do I have to find that exract it and put it somewhere.
Thanks
chas

"sysoc.in_" was provided in the link as an example. In your case, it would be "medctroc.dl_"

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for bearing with me:
Before I begin is this the correct command:
expand E:\i386\sysoc.in_ -r c:\windows\ehome

where E is my cd drive and c is where windows is located.
Thanks again!

Hi ChasX,

I believe you should expand the file and place it in the following location:

C:\windows\ehome

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


I sucessfully expanded the file into my system from the CD. I tried to open
add/remove win.. comp.. and once again the error message said it could not
load medctroc.dll or function MedCtrOciProc could not be found. I checked my
system and medctroc.dll could not be found(I did a complete search).
Thanks again for your help.
chas


:

You need to expand the module from the Windows XP CD, chas. For more details, see:

How to expand Windows XP files from the installation disk:
http://support.microsoft.com/default.aspx?scid=kb;en-us;888017

Microsoft Windows XP - Expand:
http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/expand.mspx

Example:
http://windowsxp.mvps.org/sysocerror.htm

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks Ramesh:
I unzipped the file to my .inf file, checked and it was there. I tried to
open the add or remove windows components again and I got the following
message: Set up library medctroc.dll could not be loaded, or function
MedCtrOci setup Proc could not be found. Error code 0x7e. I wonder if the
whole routine is corrupt. Can the whole thing be repaired. I am trying to
avoid reinstalling Windows XP prof. It used to work, but I must have done
something wrong.
Thanks again for your help.
chas

:

Hi ChasX,

I've uploaded "medctroc.zip" in my site here:
http://windowsxp.mvps.org/temp/medctroc.zip

Download/Unzip/Extract the enclosed file (medctroc.inf) and move it to C:\Windows\Inf folder.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


Thanks for the response, the listed sites list downloads for the missing
file, but I am not sure where to place it. Is there a specific site which
instructs how to employ the file.
Thanks again

:

Search google for medctroc and you'll have all the info you need.
I tried to use add/remove windows components, and it returned "cannot open
medctroc.inf. I checked my .inf file and I located medctroc.pnf, but no
medctroc .inf. Can someone suggest how I can use add/remove windows
components under these circumstances.
Thank you very much.
chas

 

[Ramesh, MS-MVP]

You're welcome Chas.

--
Regards,

Ramesh Srinivasan, Microsoft MVP [Windows Shell/User]
Windows® Troubleshooting http://www.winhelponline.com


THANK YOU Ramesh! It worked perfectly.
Chas