Can't download SP2 to save........

  • Thread starter Thread starter ~ FreeSpirit ~
  • Start date Start date
F

~ FreeSpirit ~

Every time I try to download SP2 to save to a CD (from the MS site) it
starts out as a slow 80 kb and trickles off to 40 KBs, then stops
altogether. I have Satellite download and this should download in a few
minutes - not hours! How is this downloaded to save?

FS~
 
~ FreeSpirit ~ said:
Every time I try to download SP2 to save to a CD (from the MS site) it
starts out as a slow 80 kb and trickles off to 40 KBs, then stops
altogether. I have Satellite download and this should download in a
few minutes - not hours! How is this downloaded to save?
Click to expand...

Please stop MultiPosting and begin CrossPosting when necessary..

~ FreeSpirit ~ said:
Every time I try to download SP2 to save to a CD (from the MS site)
it starts out as a slow 80 kb and trickles off to 40 KBs, then stops
altogether. I have Satellite download and this should download in
a few minutes - not hours! How is this downloaded to save?
Click to expand...

Andrew E. wrote
Try R.clicking on the button,select "save as".
You can also order the cd,"free" from microsoft.
Click to expand...

~ FreeSpirit ~ said:
Thanks. Yes, that's what I did. I tried 3 times now and each
time it trailed off to nothing. :-(
I had hoped I could just download it, burn it to a CD and save it.
Click to expand...

Shenan said:
Where are you downloading it from?

Direct Download of Service Pack 2 (SP2) for Windows XP
http://snipurl.com/8bqy

Order the Free Windows XP SP2 CD
http://snipurl.com/8umo

What browser are you using to download it?

Do you have any "download accelerators" or "Internet accelerators"
installed?

I just tried and stayed consistently above 630KB/sec.

So it is not Microsoft but your provider or some hop between yourself
and Microsoft could be having trouble.

What does a TRACERT to download.microsoft.com give you?
I never got anything above 107ms and it was only 8 hops.
Click to expand...


~ FreeSpirit ~ said:
I can't get to Sp2 downloads page again to give you the URL. Now
I keep getting a page that says "Try Microsoft Update Today" when I
search for the Sp2 download.

(as for the Ordering of a CD..) That's what I just did.
However I had time tonight to download
and burn it to a CD rather than wait 4 to 6 weeks for it to arrive. I did
finally order it from MS - a few minutes ago. Now I can't even
find/get to the download page.

Using IE6. No (accellerators) because my Satellite (Direcway) is so fast.
None are needed.

It started at about 100KB/sec which rapidly dropped off to 40 or
less,... then it stops altogether.

This is possible. However, now I can't get to a Sp2 download
page........ I keep getting routed back to the "Try Microsoft Update
Today" when I search for the Sp2 download.

What is a TRACERT?
107ms? 8 hops?
Click to expand...

You realize I gave you the direct link to the download for SP2 above, right?
http://snipurl.com/8bqy

If it started at 100KB, that's "marginally fast", but good enough I guess.
heh

TRACERT..
You could have found this information on your own machine and/or using a
GOOGLE search.

Start button --> Help and Support --> search for:
TRACERT

(It is shortened version of "Trace Route", or tracing the route you go
through to get to a site from your computer. It tells you how long it takes
to get from each hop to the next - since you "hop" from your computer to the
first router, from the first router to the next and so on until you reach
your destination.)

To trace a path by using the tracert command
- Open Command Prompt, and type the following:
tracert host_name
(replace host_name appropriately.)

Or, type tracert ip_address
(replace ip_address appropriately)

where host_name or ip_address is the host name or IP address, respectively,
of the remote computer.

For example, to trace a connection route from this computer to
www.microsoft.com, type the following at a command prompt:
tracert www.microsoft.com

If you do not want the tracert command to resolve and display the names of
all routers in the path, use the -d parameter. This expedites the display of
the path. For example, to trace a path from this computer to
www.microsoft.com without displaying the router names, type the following at
a command prompt:

tracert -d www.microsoft.com

* Notes

- To open a command prompt, click Start, point to All Programs, point to
Accessories, and then click Command Prompt.
- The tracert command traces the path by sending Internet Control Message
Protocol (ICMP) Echo Request and Echo Reply messages (similar to the ping
command) to produce command-line report output about each router that is
crossed and the roundtrip time (RTT) for each hop. Packet filtering policies
on routers, firewalls, or other types of security gateways might prevent the
forwarding of this traffic.
- If tracert is unsuccessful, you can use the command output to help
determine at which intermediate router forwarding failed or was slowed.

Search using Google!
http://www.google.com/
(How-to: http://www.google.com/intl/en/help/basics.html )

Essentially, my tracert showed "download.microsoft.com" to be only 8 hops
aways, with the largest delay from one router to the next of 107
milliseconds(ms).
 
Shenan Stanley said:
===== SNIP!
Click to expand...
You realize I gave you the direct link to the download for SP2 above,
right?
http://snipurl.com/8bqy

If it started at 100KB, that's "marginally fast", but good enough I guess.
heh

TRACERT..
You could have found this information on your own machine and/or using a
GOOGLE search.

Start button --> Help and Support --> search for:
TRACERT

(It is shortened version of "Trace Route", or tracing the route you go
through to get to a site from your computer. It tells you how long it
takes
to get from each hop to the next - since you "hop" from your computer to
the
first router, from the first router to the next and so on until you reach
your destination.)

To trace a path by using the tracert command
- Open Command Prompt, and type the following:
tracert host_name
(replace host_name appropriately.)

Or, type tracert ip_address
(replace ip_address appropriately)

where host_name or ip_address is the host name or IP address,
respectively,
of the remote computer.

For example, to trace a connection route from this computer to
www.microsoft.com, type the following at a command prompt:
tracert www.microsoft.com

If you do not want the tracert command to resolve and display the names of
all routers in the path, use the -d parameter. This expedites the display
of
the path. For example, to trace a path from this computer to
www.microsoft.com without displaying the router names, type the following
at
a command prompt:

tracert -d www.microsoft.com
Click to expand...

## None of it would make any sense to me anyway. I can't cause fewer hops
or a faster download.
* Notes

- To open a command prompt, click Start, point to All Programs, point to
Accessories, and then click Command Prompt.
- The tracert command traces the path by sending Internet Control Message
Protocol (ICMP) Echo Request and Echo Reply messages (similar to the ping
command) to produce command-line report output about each router that is
crossed and the roundtrip time (RTT) for each hop. Packet filtering
policies
on routers, firewalls, or other types of security gateways might prevent
the
forwarding of this traffic.
- If tracert is unsuccessful, you can use the command output to help
determine at which intermediate router forwarding failed or was slowed.

Search using Google!
http://www.google.com/
(How-to: http://www.google.com/intl/en/help/basics.html )
Click to expand...

## I know what Google is. :-)
Essentially, my tracert showed "download.microsoft.com" to be only 8 hops
aways, with the largest delay from one router to the next of 107
milliseconds(ms).
Click to expand...

## Sorry, but how can this kind of information help me when I can't
download something from the MS website? I'm not a technician and it means
nothing to me. I can't bypass hops or shorten the milliseconds. I ordered
the CD. I'll just have to wait for it to arrive in the mail.

FS~
 
~ FreeSpirit ~ said:
Every time I try to download SP2 to save to a CD (from the MS site) it
starts out as a slow 80 kb and trickles off to 40 KBs, then stops
altogether. I have Satellite download and this should download in a few
minutes - not hours! How is this downloaded to save?

FS~
Click to expand...

Rather than mess with a download, try to find a computer dealer in your town
who will burn the SP2 update to a CD (which you supply). I did that here in
Albuquerque and it worked great.
 
bearman said:
Rather than mess with a download, try to find a computer dealer in your
town who will burn the SP2 update to a CD (which you supply). I did that
here in Albuquerque and it worked great.
Click to expand...
=====================================
Thanks. After the 3rd failed attempt I simply ordered it on CD from MS.

FS~
 
hello

use any third party utility like download Accelerator plus
its a free ware download manager.
while downloading u can stop and start. when ur connection is disconnected u
can resume from the same possition where its stops.

try it and let me know

thanks
nijesh
 
Back
Top