can't change time

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I am using Vista Business. I am set for the correct time zone (Eastern Time -
US) but every time I change the time, about 4-5 seconds later, the clock
automatically changes to 4 hours ahead. I tried with and without UAC
enabled, same result. If I set it for 2:00pm, it automatically changes it to
6:00pm. How can I set my computer for the correct time? Thanks.
 
Is your clock set to sync with an Internet time server? To check, open the
clock and see if there is a tab labeled "Internet Time." If there is, see if
your clock is set to sync with a particular time server and make sure that
time server is appropriate for your time zone.

Charlene
 
Thanks for the reply Charlene.

The PC is set to sync up to a time server, but it does not succeed even when
I try to sync manually. I am behind a firewall here, so it goes through a
proxy, and I'm not sure if that is the reason it can't sync up.

I also changed the Local Security Policy to elevate to Administator, and the
clock still goes 4 hours ahead each time I change. It is baffling my mind...
I can't figure it out.

Thanks.
john
 
Look at the system logs in event viewer to see if there are any logs that may
be helpful regarding time services.
 
If the time does in fact resets to 4 hours later than entered, look at the
current time and subtract 4 hours. Enter that time. The system will reset
the time to 4 hours later, which is your current time.
 
Back
Top