Can't burn cd-r...

  • Thread starter Thread starter Henrik Andersen
  • Start date Start date
H

Henrik Andersen

I use a Lite-On DVD/CD-R drive. The drive will not see a cd-r in the drive.
The computer says Insert an empty cd-r, but there is a empty cd-r in the
drive. I have no problems reading and burning dvd-r's. I use Nero for
burning cd-r's. I have used the same media for a very long time, so it can
not be a compability problem. I have also tried 2 others brands of cd-r's.
They dont work either. Is this a software problem?
 
Your comment about "for a very long time" is quite telling. Chances are
that the Lite-On device has crashed. Invest money in a good burner.
Lite-On is the bottom of the barrel.

The other option would be to try to clean the laser stylus in the device.
That may fix it.
 
Completely Lost said:
Your comment about "for a very long time" is quite telling. Chances are
that the Lite-On device has crashed. Invest money in a good burner.
Lite-On is the bottom of the barrel.

The other option would be to try to clean the laser stylus in the device.
That may fix it.
Click to expand...

Thank you for your reply. But the problem is, that I can burn dvd's without
problems. If LiteOn is the bottom of the barrel, what is the top?
 
Plextor or Sony.

Henrik Andersen said:
Thank you for your reply. But the problem is, that I can burn dvd's
without problems. If LiteOn is the bottom of the barrel, what is the top?
Click to expand...
 
Thank you for your reply. It was clearly a hardware problem. I have just
installed another cd-r drive and now everything is perfect, without any
changes in software.
 
LOL, You lost much credibility when you said that Sony's a top burner?... Not flaming you, but the original poster said that he was able to write to blank CDR on the system - thus the hardware isn't defective.

Perhaps the drivers for XP might be the problem, but I've seen this happen to multiple machines - XP just won't read Blank CDR, therefore refuse to write to them.



EggHeadCafe.com - .NET Developer Portal of Choice
http://www.eggheadcafe.com
 
The computer says Insert an empty cd-r, but there is an empty cd-r in the drive.



Henrik Andersen wrote:

Can't burn cd-r...
16-Mar-07

I use a Lite-On DVD/CD-R drive. The drive will not see a cd-r in the drive.
The computer says Insert an empty cd-r, but there is a empty cd-r in the
drive. I have no problems reading and burning dvd-r's. I use Nero for
burning cd-r's. I have used the same media for a very long time, so it can
not be a compability problem. I have also tried 2 others brands of cd-r's.
They dont work either. Is this a software problem?

Previous Posts In This Thread:

Can't burn cd-r...
I use a Lite-On DVD/CD-R drive. The drive will not see a cd-r in the drive.
The computer says Insert an empty cd-r, but there is a empty cd-r in the
drive. I have no problems reading and burning dvd-r's. I use Nero for
burning cd-r's. I have used the same media for a very long time, so it can
not be a compability problem. I have also tried 2 others brands of cd-r's.
They dont work either. Is this a software problem?

Your comment about "for a very long time" is quite telling.
Your comment about "for a very long time" is quite telling. Chances are
that the Lite-On device has crashed. Invest money in a good burner.
Lite-On is the bottom of the barrel

The other option would be to try to clean the laser stylus in the device.
That may fix it


Re: Can't burn cd-r...
Thank you for your reply. But the problem is, that I can burn dvd's withou
problems. If LiteOn is the bottom of the barrel, what is the top?

Re: Can't burn cd-r...
Plextor or Sony.

Thank you for your reply. It was clearly a hardware problem.
Thank you for your reply. It was clearly a hardware problem. I have jus
installed another cd-r drive and now everything is perfect, without an
changes in software.

XP cd writing
LOL, You lost much credibility when you said that Sony's a top burner?... Not flaming you, but the original poster said that he was able to write to blank CDR on the system - thus the hardware isn't defective.

Perhaps the drivers for XP might be the problem, but I've seen this happen to multiple machines - XP just won't read Blank CDR, therefore refuse to write to them.


Submitted via EggHeadCafe - Software Developer Portal of Choice
Get Identity Values of Multi-row insert by using OUTPUT Clause
http://www.eggheadcafe.com/tutorial...5-dd4f996da99f/get-identity-values-of-mu.aspx
 
Mike Ward wrote:

Submitted via EggHeadCafe - Software Developer Portal of IDIOTS
Get Identity Values of Multi-row insert by using OUTPUT Clause
Click to expand...

I don't think the developers of EggheadCafe have a clue about Identity
values in their own stolen database material, never mind about their
user's cluelessness in using such a 'resource'.
 
Back
Top