Can't ANYONE help me with this????

  • Thread starter Thread starter FunLovnRu2
  • Start date Start date
F

FunLovnRu2

I have a problem with my CD-RW not being able to burn CD's
and my DVD not opening and when it does, sometimes it will
read the CD, sometimes not. I've found the 'error report'
on both but don't know what they mean or how to fix them.

The errors are:

1)The driver detected a controller error on \Device\CdRom1

and

2)The device, \Device\CdRom0, has a bad block.

Can ANYONE PLEASE help me with this...I hope somebody will
respond with some help!! Please!!!!
 
http://tinyurl.com/n254

Rt click on MyComputer>Select Prop>Hardware>Device Manager. Check IDE
ATA/ATAPI Controllers.
Rt click on Primary and select Prop>Advanced Settings. Make sure DMA
is selected Do the same for the
Secondary.
 
Buy a new one. Or if it is new get it replaced. I had the "bad block" error on an HP CD/DVD combo drive and HP replaced it. The laser was bad. After a year I got the same error again. I replaced the drive and it is working fine.

--
Just my ¢ worth
Jeff
__________in response to__________
| I have a problem with my CD-RW not being able to burn CD's
| and my DVD not opening and when it does, sometimes it will
| read the CD, sometimes not. I've found the 'error report'
| on both but don't know what they mean or how to fix them.
|
| The errors are:
|
| 1)The driver detected a controller error on \Device\CdRom1
|
| and
|
| 2)The device, \Device\CdRom0, has a bad block.
|
| Can ANYONE PLEASE help me with this...I hope somebody will
| respond with some help!! Please!!!!
|
 
But CD drives "never" go bad (o:

I wish I had ten bucks for every one I have ever replaced for my clients.


Buy a new one. Or if it is new get it replaced. I had the "bad block"
error on an HP CD/DVD combo drive and HP replaced it. The laser was bad.
After a year I got the same error again. I replaced the drive and it is
working fine.

--
Just my ¢ worth
Jeff
__________in response to__________
| I have a problem with my CD-RW not being able to burn CD's
| and my DVD not opening and when it does, sometimes it will
| read the CD, sometimes not. I've found the 'error report'
| on both but don't know what they mean or how to fix them.
|
| The errors are:
|
| 1)The driver detected a controller error on \Device\CdRom1
|
| and
|
| 2)The device, \Device\CdRom0, has a bad block.
|
| Can ANYONE PLEASE help me with this...I hope somebody will
| respond with some help!! Please!!!!
|
 
Back
Top