Canons Duff Magenta Saga

  • Thread starter Thread starter Davy
  • Start date Start date
D

Davy

Spent a flipping evening trying to resolve a incorrect colour problem
on my ip5000.

Yes, yes yes I changed the Magenta OEM tank, but the red's came out a
browny red, all the other colours was more or less ok, so in went a
fresh Magenta tank, a couple of flushes later... "this will do
it I said", nope wrong you are sir... so I changed the other
two colours and was just the same.

Having a spare print head I tried that... I discovered new words for
the dictionary as the fault was still the same. I finally sorted
the problem when I replaced the Magenta with a borrowed JR brand.

So you see folks I had two duff Canon OEM Magenta tanks, comparing the
inks the Canon's Magenta was certainly different being much deeper
looking.

Wonder how many other folks have been had..?

So the question now is how should I clean and store the original print
head or is it 'a clodder'.

Davy
 
You never had any of these problems when you were using all Canon and
never anything else ink.
 
You never had any of these problems when you were using all Canon and
never anything else ink.
Click to expand...
Actually, you never have this problem when you refill, because you use
the same ink, from the same bottle, 20 or 30 times before you have to
buy a new one.

But if you buy cartridges that are filled by someone else (OEM or
aftermarket) you NEVER KNOW WHAT YOU'RE GOING TO GET. Get it, blockhead?
(pun intended)
 
Irwin said:
Actually, you never have this problem when you refill, because you use
the same ink, from the same bottle, 20 or 30 times before you have to
buy a new one.
Click to expand...

and then you have the same problem. and you also do not know if all of
the bottles come from the same mfg/formulator. I do not like buying a
lot of crap.
 
Back
Top