Canon Pixma IP4300 bubblejet - explain Auto Power Off

  • Thread starter Thread starter nigel.l.jones
  • Start date Start date
N

nigel.l.jones

I've just received a Canon IP4300 which seems a great printer -
certainly quick/accurate once it gets going, but I'd like to understand
auto-power-off mode.

Ok, so it seems to me it puts the printer into standby mode
automatically after a period of time if printer not used. Fine, but
what are the implications

- Does it affect how often the heads are cleaned? Are they cleaned
only when the machine powered on? Is this a "full" power on, or return
from standby?
- Or are the heads always cleaned after an idle period?
- or on first print if time since last use > t seconds
.... etc...
- how much does it affect time-to-print-first-sheet?

I did notice that having left the printer for 24 hours it took ages to
print it's first sheet (it had powered down). Would this be much
different if auto power off disabled?
Would the power consumption differ that much?

Thanks
Nigel.
 
I would not use any of those features. Just leave the thing powered on
all of the time and forget it. I have never turned my IP4000 of in two
years and have had zero problems. I always use Canon ink even though it
is expensive.
 
The auto-off feature activates when the printer hasn't received any
print data for a user-specified period of time. There is also an
auto-on feature, where the USB port is monitored for reception of
print data which would trigger the auto-on circuitry. Both user
settings are under the maintenance tab of the print driver (auto
power button). It's also explained in the Driver Manual for the
product.

For comparison, power consumption of the iP4200 is 23w when printing,
0.8w when in standby (power on), and 0.4w when powered off. Why it
consumes power when off is not explained, so presumably it is
monitoring USB activity whether auto-on is activated or not.
Apparently, the only way to ensure absolutely no power is consumed,
is to unplug the printer, or cut power via a power bar.

The printer, if left powered on, will park the printhead on a
protective pad after a period of inactivity to prevent the ink from
drying out and causing clogs. Once this happens, there is absolutely
no advantage to leaving it powered on, other than boot-up time.

The power-off cycle also parks the printhead in the same fashion.
Note, never cut power to the printer after initiating a power-off
until you've confirmed it has completed the power-off cycle. If you
cut power too early, e.g. pull the plug, or switch off a power bar,
the printhead may not be fully parked, leaving the printhead
exposed.

Printhead cleaning cycles, besides being initiated by the user, can be
initiated by 17 different conditions (note that this is from the
iP4200 service manual, section 2.2). I imagine the iP4300 would be
similar. Suffice it to say they'll happen automatically when they
happen. If you'd like to research this further, get yourself a
service manual for the iP4300.

Hope this answers your questions...
 
Bullitt said:
happen. If you'd like to research this further, get yourself a
service manual for the iP4300.
Click to expand...

Thanks for the info. Sounds like the service manual may be an
interesting read, but I'm still not really clear on the
benefit/difference of auto power off other than the 0.4W vs 0.8W
consideration (both pretty low).
 
Thanks for the info. Sounds like the service manual may be an
interesting read, but I'm still not really clear on the
benefit/difference of auto power off other than the 0.4W vs 0.8W
consideration (both pretty low).
Click to expand...

There are as many opinions as there are options when debating whether to power
equipment off when not in use.
I tend to trust the manufacturer, if they provide an auto power function then
it is safe to use it. There will be some small power savings.
I have an ip4000 and have used auto power off since new, close to 2 years with
no issues of any kind.
Tony
 
If the machine is in "Standby" (it has no real "off" mode, apart from
disconnecting mains), it wont wake itself to clean. The "standby" APO
sets it in is the same "off" as you can force it into with the power
button on the unit.

I think that is how it works, as it does have a clock.

Under a minute for me. I print a sheet every couple days, right now.


I don't know.

No, as said, it has only one soft off mode.
 
Back
Top