Canon D1250 U2F

  • Thread starter Thread starter doug
  • Start date Start date
D

doug

HI all, does anyone know how to access the underside of the glass on the
Canon D1250 U2F for cleaning? (it`s no longer under warranty) any info.
really appreciated. Thanks Doug.
 
----- Original Message -----
From: "doug" <>
Newsgroups: comp.periphs.scanners
Sent: Friday, August 13, 2004 6:13 PM
Subject: Canon D1250 U2F

HI all, does anyone know how to access the underside of the glass on the
Canon D1250 U2F for cleaning? (it`s no longer under warranty) any info.
really appreciated. Thanks Doug.

DISCONNECT cords
Open lid
Remove two screws near hinges
Remove screw holding wire harness plug in middle
Gently and evenly remove plug with a very small screw driver
Release the plastic snaps in case near "hinge end of lid."
Once this end is lose and you may move freely;
slide the entire loose portion (glass included) away from the cabinet case.)
Clean both sides and reassemble.
 
lostinspace said:
----- Original Message -----
From: "doug" <>
Newsgroups: comp.periphs.scanners
Sent: Friday, August 13, 2004 6:13 PM
Subject: Canon D1250 U2F



DISCONNECT cords
Open lid
Remove two screws near hinges
Remove screw holding wire harness plug in middle
Gently and evenly remove plug with a very small screw driver
Release the plastic snaps in case near "hinge end of lid."
Once this end is lose and you may move freely;
slide the entire loose portion (glass included) away from the cabinet case.)
Clean both sides and reassemble.
thanks for the reply,it seems easier job than I thought! Regards
Doug.
 
Back
Top