Canon C20 mechanical problem

  • Thread starter Thread starter Brian
  • Start date Start date
B

Brian

My C20's paper feed roller stops 180 degrees out of sync and no longer feeds
properly. It takes through 3 sheets without printing and then stops with a
sheet half way through.
This happened once before and the repair shop took about 10 minutes to fix
it. The repair shop has closed down and Canon cannot/will not help. There
are no other repair shops in my area.
I guess that it's a simple job but I can't see how to do it myself.
Can anyone offer any suggestions?

Thanks,

Brian
 
Brian said:
My C20's paper feed roller stops 180 degrees out of sync and no longer feeds
properly. It takes through 3 sheets without printing and then stops with a
sheet half way through.
This happened once before and the repair shop took about 10 minutes to fix
it. The repair shop has closed down and Canon cannot/will not help. There
are no other repair shops in my area.
I guess that it's a simple job but I can't see how to do it myself.
Can anyone offer any suggestions?
Click to expand...
I believe this unit is also know as the C3000 in some markets.

Brian
 
Back
Top