cann't install XP pro

  • Thread starter Thread starter Jack
  • Start date Start date
J

Jack

My desktop was hit by the worm and I tried to re-install
the XP Pro, but it stopped after the HD partitioning.
Looks like it cann't go to formatting step. Any ideas?
 
Jack;
Disconnect the network cable.
Do NOT reconnect the cable until Windows is up with firewall enabled.
Disconnect all peripherals (camera, printer, scanner, etc)
Disconnect network/modem cable.
Go to BIOS and set CDROM as boot device before hard drive.
Insert Windows XP CD and reboot.
At "Press any key to boot to CDROM" quickly press a key and follow the
prompts for a Clean installation:
http://www.winsupersite.com/showcase/windowsxp_sg_clean.asp
Delete all partitions in step 5 if you desire to erase all data on the
hard drive.
Partitioning and formatting will be done automatically.
All data will be destroyed, back-up important data first.

Enable or install firewall BEFORE connecting network cable.
http://support.microsoft.com/?kbid=283673

Install ALL Critical Windows Updates:
Start/All Programs/Windows Update

After you are finished, you will need to load the appropriate drivers.

If your computer was shipped with Windows XP, these procedures may or
may not apply.
Check your manual or contact the computer manufacturer for more
details.
 
Back
Top