cannot start the installation

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have the system with

Intel QX6700 with x1950 Crossfired and 2 WesternDigital 74G drive.
Motherboard is Intel D975XBX2.

I try to install Vista Ultimate 64-bit edition and I cannot start the
installation after power up.

Is there any suggestion for this?
 
Philip said:
I have the system with

Intel QX6700 with x1950 Crossfired and 2 WesternDigital 74G drive.
Motherboard is Intel D975XBX2.

I try to install Vista Ultimate 64-bit edition and I cannot start the
installation after power up.

Is there any suggestion for this?
Click to expand...


set your bios to boot first from cd/dvd
 
set your bios to boot first from cd/dvd
Click to expand...


Or, as soon as the system starts to boot, press the PAUSE key. When your
monitor turns on (assuming you have a CRT, this is) press ENTER and watch
the info. it should say something like "F11 for Boot Selection" Press F11
(or whatever key it says to) and you should get a menu of drives installed
in yur system. Select the CD ROM. That way, you don't have to alter the
BIOS and then do it again!
 
Back
Top