Cannot resolve remote website

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have one Server running Active directory, DNS and RAS. I setup one Forward lookup zone named crader.com with type Active Directory integrated. All my DNS is done off-site, so i added my ISP's DNS to the forwaders tab. Also i made sure my DNS server has NOT been configured as a Root Server during the Active Directory installation process. I have no error messages in event viewer. The problem is when i try to resolve www.crader.com it says page connot be displayed. Also when i do a nslookup www.crader.co
it displays
*** Can't find server name for address 10.1.1.6: Non-existent domai
Server: localhos
Address: 127.0.0.

DNS request timed out
timeout was 2 seconds
*** Request to localhost timed-ou

Can someone please help.
 
In
Derek said:
I have one Server running Active directory, DNS and RAS. I setup one
Forward lookup zone named crader.com with type Active Directory
integrated. All my DNS is done off-site, so i added my ISP's DNS to
the forwaders tab. Also i made sure my DNS server has NOT been
configured as a Root Server during the Active Directory installation
process. I have no error messages in event viewer. The problem is
when i try to resolve www.crader.com it says page connot be
displayed. Also when i do a nslookup www.crader.com it displays: ***
Can't find server name for address 10.1.1.6: Non-existent domain
Server: localhost
Address: 127.0.0.1

DNS request timed out.
timeout was 2 seconds.
*** Request to localhost timed-out

Can someone please help.
Click to expand...

In your internal DNS forward lokup zone for crader.com create a new host
name www point it to the IP of the web site which is: 206.163.82.190
www.crader.com
Click to expand...
Server: kjweb.lsaol.com
Address: 192.168.0.2

Non-authoritative answer:
www.crader.com canonical name = crader.com
crader.com
crader.com
Click to expand...
Server: kjweb.lsaol.com
Address: 192.168.0.2

Name: crader.com
Address: 206.163.82.190

The nslookup message is caused because there is no PTR record for 10.1.1.6
IP you can ignore that or create the reverse lookup and PTR.

You should remove the 127.0.0.1 loop back from TCP/IP properties it will
cause registration problems you don't need an alternate DNS unless you add
another local DNS server. Do not put your ISP's DNS in there for sure.
 
Thanks,

The www record worked.

For the 127.0.0.1 loopback i do not have that setup in my TCP/IP properties. I only have the IP Address of my DNS server which happens to be the same server. Will this cause a problem. What should be there?
 
In
Derek said:
Thanks,

The www record worked.

For the 127.0.0.1 loopback i do not have that setup in my TCP/IP
properties. I only have the IP Address of my DNS server which happens
to be the same server. Will this cause a problem. What should be
there?
Click to expand...

*** Can't find server name for address 10.1.1.6: Non-existent domain
Server: localhost
Address: 127.0.0.1
According to this it is using 127.0.0.1
 
You need to create a host record named "www" in the crader.com zone on your DC/DNS server. This server thinks that it's
authoritative for the crader.com domain so it will not forward requests for this domain to any other server.

Thank you,
Mike Johnston
Microsoft Network Support
--

This posting is provided "AS IS" with no warranties, and confers no rights. Use of included script samples are subject to the
terms specified at
http://www.microsoft.com/info/cpyright.htm

Note: For the benefit of the community-at-large, all responses to this message are best directed to the newsgroup/thread from
which they originated.
 
Back
Top