N
Nick Savoiu
Hi,
I'm having trouble importing video from my miniDV camcoder.
Setup:
PC: Athlon XP2800+, 1GB PC-3200 RAM,
2 x 60GB 7200 ATA100, Radeo 9550 128MB
WinXP/Win2K3
IEE1394: generic VIA 6306 add-on card
DV: JVC GR-D33U
connected using DV -> 4pin -> 6pin -> PC cable.
What's going on:
1. Added card to PC -> Windows seems to detect it properly as VIA OHCI
Compliant IEEE 1394 bus controller
2. Connected DV to PC and turned it on -> Windows detects it properly as a
JVC GR-D33
3. Open MM2 go to capture (select DV-AVI) and start recording -> camera
starts playing the video but nothing gets captured or previed. After
stopping recording I'm told no data was captured. If I just try to just
preview the video again I cannot see anything although I can play, pause,
rewind and fast forward the tape just fine.
I'm a bit stumped and frustrated... plug-n-play, ahem... Any suggestions?
Nick
I'm having trouble importing video from my miniDV camcoder.
Setup:
PC: Athlon XP2800+, 1GB PC-3200 RAM,
2 x 60GB 7200 ATA100, Radeo 9550 128MB
WinXP/Win2K3
IEE1394: generic VIA 6306 add-on card
DV: JVC GR-D33U
connected using DV -> 4pin -> 6pin -> PC cable.
What's going on:
1. Added card to PC -> Windows seems to detect it properly as VIA OHCI
Compliant IEEE 1394 bus controller
2. Connected DV to PC and turned it on -> Windows detects it properly as a
JVC GR-D33
3. Open MM2 go to capture (select DV-AVI) and start recording -> camera
starts playing the video but nothing gets captured or previed. After
stopping recording I'm told no data was captured. If I just try to just
preview the video again I cannot see anything although I can play, pause,
rewind and fast forward the tape just fine.
I'm a bit stumped and frustrated... plug-n-play, ahem... Any suggestions?
Nick