Cannot access other resources once connected.

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

Hello,

I have a strange problem. First. I would liek to mention that everything was
working fine for about a year. Now all of a sudden I am having these issues.

I have tried everyting.

I have a VPN server setup on a windows 2003 SP2 stanard server. I have a
domain. I have only 1 nic installed. I have a DHCP and a WINS, DNS insalled
on the DC on our network. These are 2 seperate servers.

I have noticed the following
I can ping the client from the servey, by name and ip.
From the client I can ping the vpn server only with the IP. But no other
servers on the network. I am accessing the server from the client through RDP
it only works wiith the IP address.
It seems to be some kind of routing missing on the server.

What could of changed to stop it from working and how can I fix it.

Thanks
 
I would check the server routing table first. Or these links may help.

RRAS Routing issue
http://www.chicagotech.net/netforums/viewtopic.php?t=566

routing issues on vpn2) Edit route table manually if you know how to or check routing page on this ... SYMPTOMS: If you enable VPN on a server, the RRAS will accept incoming VPN ...
www.chicagotech.net/routingissuesonvpn.htm


Bob Lin, MS-MVP, MCSE & CNE
Networking, Internet, Routing, VPN Troubleshooting on http://www.ChicagoTech.net
How to Setup Windows, Network, VPN & Remote Access on http://www.HowToNetworking.com
Hello,

I have a strange problem. First. I would liek to mention that everything was
working fine for about a year. Now all of a sudden I am having these issues.

I have tried everyting.

I have a VPN server setup on a windows 2003 SP2 stanard server. I have a
domain. I have only 1 nic installed. I have a DHCP and a WINS, DNS insalled
on the DC on our network. These are 2 seperate servers.

I have noticed the following
I can ping the client from the servey, by name and ip.
From the client I can ping the vpn server only with the IP. But no other
servers on the network. I am accessing the server from the client through RDP
it only works wiith the IP address.
It seems to be some kind of routing missing on the server.

What could of changed to stop it from working and how can I fix it.

Thanks
 
Back
Top