Can Matrox G550 display 1680x1050 on DVI?

  • Thread starter Thread starter Eric Gisin
  • Start date Start date
E

Eric Gisin

I have a Matrox G450 running a 22" LCD 1680x1050 using VGA.
DVD playback is a problem with only 16MB (dual-head is disabled).

A Matrox G550 would give me 32MB and DVI+VGA.
Does it support 1680x1050 using DVI? The manual says 1280x1024.

According to http://www.datapro.net/techinfo/dvi_info.html,
"DVI single link 60-Hz LCD can display a resolution of 1920 x 1080"
 
Eric Gisin said:
A Matrox G550 would give me 32MB and DVI+VGA.
Does it support 1680x1050 using DVI? The manual says 1280x1024.
Click to expand...

Matrox cards generally can be set to any arbitrary geometry
up to the dot clock limit of card or port. It might take a tweak
utility to set it, however.

Matrox appears to have shut down their user forum, which
was previously a useful source of help on questions like these.

You might try:
<http://www.matrox.com/graphics/en/contact/home.php?
section=productinfo>

Or just buy a used G550 on eBay.
It could be a very cheap experiment.
 
Back
Top