Can I clone a SCSI disk to an SATA disk?

  • Thread starter Thread starter SW
  • Start date Start date
S

SW

Hi,

I have a W2000 server using a single SCSI disk, that I'd like to replace
with a SATA disk, to get more disk space, obviously, but also to save money
as I believe the SATA disk will offer similar performance to the SCSI.

However my question is, will I be able to use any cloning utility to clone
the disk, or will I need a reinstall? I'll have to pay a third party to
reinstall their software, so I'd prefer a clone.

All help gratefully received!

Thanks
SW
 
SW said:
Hi,

I have a W2000 server using a single SCSI disk, that I'd like to replace
with a SATA disk, to get more disk space, obviously, but also to save money
as I believe the SATA disk will offer similar performance to the SCSI.

However my question is, will I be able to use any cloning utility to clone
the disk, or will I need a reinstall? I'll have to pay a third party to
reinstall their software, so I'd prefer a clone.

All help gratefully received!

Thanks
SW

If your cloning utility recognises the SATA disk and if your
machine can boot from a SATA diisk then you should have
no problem. You may need to make some adjustments to
the hidden file c:\boot.ini. Post its contents here if you decide
to go ahead.
 
Pegasus (MVP) said:
If your cloning utility recognises the SATA disk and if your
machine can boot from a SATA diisk then you should have
no problem. You may need to make some adjustments to
the hidden file c:\boot.ini. Post its contents here if you decide
to go ahead.

Hi,

I'm currently checking whether or not Norton Ghost will enable me to do
that. Meanwhile here's the contents of the boot.ini

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Server"
/fastdetect

Thanks for your help,

SW
 
SW said:
Pegasus (MVP) said:
If your cloning utility recognises the SATA disk and if your
machine can boot from a SATA diisk then you should have
no problem. You may need to make some adjustments to
the hidden file c:\boot.ini. Post its contents here if you decide
to go ahead.

Hi,

I'm currently checking whether or not Norton Ghost will enable me to do
that. Meanwhile here's the contents of the boot.ini

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Server"
/fastdetect

Thanks for your help,

SW

This is a stock-standard boot.ini file. No modifications are required
when using it on a SATA disk.
 
Thanks

Pegasus (MVP) said:
SW said:
Pegasus (MVP) said:
Hi,

I have a W2000 server using a single SCSI disk, that I'd like to replace
with a SATA disk, to get more disk space, obviously, but also to save
money
as I believe the SATA disk will offer similar performance to the SCSI.

However my question is, will I be able to use any cloning utility to clone
the disk, or will I need a reinstall? I'll have to pay a third party to
reinstall their software, so I'd prefer a clone.

All help gratefully received!

Thanks
SW

If your cloning utility recognises the SATA disk and if your
machine can boot from a SATA diisk then you should have
no problem. You may need to make some adjustments to
the hidden file c:\boot.ini. Post its contents here if you decide
to go ahead.

Hi,

I'm currently checking whether or not Norton Ghost will enable me to do
that. Meanwhile here's the contents of the boot.ini

[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINNT
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINNT="Microsoft Windows 2000 Server"
/fastdetect

Thanks for your help,

SW

This is a stock-standard boot.ini file. No modifications are required
when using it on a SATA disk.
 
I installed an SATA 74GB 1000rpm disk, replacing a 17GB 10000rpm SCSI disk.
Norton Ghost cloned the scsi disk, and enabled me to change partition sizes
before writing the data onto the new disk.
The result is two partitions, 12GB system the rest for data and programs.
It used to take approx 25 minutes for a SQL style backup (to disk) of an
Intersystems Cache database on the scsi disk. The new disk does it in 3
minutes!
It is fast!

Regards
SW
 
Back
Top