Can anyone help?

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

SYMPTOMS: When you insert an IBM 10/100 EtherJet CardBus
network adapter card into an IBM ThinkPad 760XD portable
computer running Microsoft Windows 2000 Professional, you
receive the following error message:

The device 'Texas Instruments PCI-1130 CardBus
Controller' has detected a CardBus card in its slot, but
the firmware on this system is not configured to allow
the CardBus controller to be run in CardBus mode.

CAUSE: This behavior occurs because Windows 2000
Professional supports only 16-bit (R2) network adapters
on this controller.

STATUS: Microsoft has confirmed that this is a problem in
Microsoft Windows 2000 Professional.
 
Have you tried here?
http://www-306.ibm.com/pc/support/site.wss/MIGR-4GJS2U.html

--
Regards,

Dave Patrick ....Please no email replies - reply in newsgroup.
Microsoft MVP [Windows NT/2000 Operating Systems]
Microsoft Certified Professional [Windows 2000]
http://www.microsoft.com/protect.


| SYMPTOMS: When you insert an IBM 10/100 EtherJet CardBus
| network adapter card into an IBM ThinkPad 760XD portable
| computer running Microsoft Windows 2000 Professional, you
| receive the following error message:
|
| The device 'Texas Instruments PCI-1130 CardBus
| Controller' has detected a CardBus card in its slot, but
| the firmware on this system is not configured to allow
| the CardBus controller to be run in CardBus mode.
|
| CAUSE: This behavior occurs because Windows 2000
| Professional supports only 16-bit (R2) network adapters
| on this controller.
|
| STATUS: Microsoft has confirmed that this is a problem in
| Microsoft Windows 2000 Professional.
|
 
Back
Top