BSOD at the end of installation

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I tried to install Vista Home Premium. At the end of the installation i get
a BSOD . The computer restarted before I could read the error.
I rolled back the installation and after using eventviewer i found this
errorcode:
Type gebeurtenis: Fout
Bron van gebeurtenis: System Error
Categorie van gebeurtenis: (102)
Gebeurtenis-ID: 1003
Datum: 5-8-2007
Tijd: 15:47:09
Beschrijving:
Foutcode; 1000007e, parameter1: c0000005, parameter2: 82c689ae, parameter3:
8220d68c, parameter4: 8220d388.

Zie Help en ondersteuning op http://go.microsoft.com/fwlink/events.asp voor
meer informatie.
Gegevens:
0000: 53 79 73 74 65 6d 20 45 System E
0008: 72 72 6f 72 20 20 45 72 rror Er
0010: 72 6f 72 20 63 6f 64 65 ror code
0018: 20 31 30 30 30 30 30 37 1000007
0020: 65 20 20 50 61 72 61 6d e Param
0028: 65 74 65 72 73 20 63 30 eters c0
0030: 30 30 30 30 30 35 2c 20 000005,
0038: 38 32 63 36 38 39 61 65 82c689ae
0040: 2c 20 38 32 32 30 64 36 , 8220d6
0048: 38 63 2c 20 38 32 32 30 8c, 8220
0050: 64 33 38 38 d388

I already installed the most recent drivers for most of my hardware.

Specs from my computer:
Mainboard : MSI MS-7204
Chipset : Intel i945P
Processor : Intel Pentium D 830 @ 3000 MHz
Physical Memory : 3072 MB
Video Card : Nvidia Corp NVIDIA GeForce 8600 GT
Hard Disk : ST3250824AS (250 GB)
DVD-Rom Drive : _NEC DVD_RW ND-3551A
DVD-Rom Drive : SONY DVD-ROM DDU1615
Network Card : Realtek Semiconductor RT8139 (A/B/C/810x/813x/C+) Fast
Ethernet Adapter
Operating System : Microsoft Windows XP Home Edition 5.01.2600 Service Pack 2

Any sugestions?
 
You could try testing for faulty RAM. Try just one stick at a time, using
some sort of process of elimination. Too, If Vista installs with the least
amount necessary to operate your computer, you can always add the rest
later.

Also, you could run the Memory Diagnostics Tool by booting your Install DVD.
Here's how:
http://www.bleepingcomputer.com/tutorials/tutorial146.html
 
You didn't say what kind of installation you are doing. Upgrade or custom
(clean) and x86 or x64. On the last reboot use the F8 key and have it not
restart on error so you can find out what the problem and code are.
Probably a driver issue at that point and there are several cards that won't
work.
 
dean-dean said:
You could try testing for faulty RAM. Try just one stick at a time, using
some sort of process of elimination. Too, If Vista installs with the least
amount necessary to operate your computer, you can always add the rest
later.

Also, you could run the Memory Diagnostics Tool by booting your Install DVD.
Here's how:
http://www.bleepingcomputer.com/tutorials/tutorial146.html



I already done this after my first installation attempt two days ago. Today was my third attemp to install Vista. The diagnostic tool gave no errors. I just tested the memory with checkit diagnostics and it gaven the same result: no errors. All the other software I use works with no problems.
Click to expand...
 
Then I would lean to the direction that John Barnes indicated, that is, a
hardware driver issue. Try installing with the absolute minimal hardware,
leaving only your mouse and keyboard, disconnecting such things as storage
devices (like USB peripherals or external drives), or anything else that
plugs into your computer, before installing. Disconnect your network
connection, and if Install asks you whether it should go online to check for
updates, say no. All hardware can be added after the install, and drivers
can be updated from the Microsoft generic ones, etc., and tested, after each
reboot, one at a time, to possibly find the glitch.
 
Back
Top