Brother Rollers

[Don Phillipson]

This Brother HL 1050 must be about seven years old.
It has recently begun misfeeding part-way through
about every third or fourth page, so that one or two
lines of print are distorted (as if italicized.)

I guess this is due to worn rollers. Any advice?

 

[measekite]

This Brother HL 1050 must be about seven years old.
It has recently begun misfeeding part-way through
about every third or fourth page, so that one or two
lines of print are distorted (as if italicized.)

I guess this is due to worn rollers. Any advice?

TIME TO BUY A NEW PRINTER

 

[Davy]

Don, there was something a little while back about some stuff you ca
use on the rollor to make them grip

Best thing is to have a peep a
http://www.howtofixcomputers.com/bb/ftopic156741.html, if this help
any I know not

Dav

 

[Lou]

Don, there was something a little while back about some stuff you can
use on the rollor to make them grip.

Best thing is to have a peep at
http://www.howtofixcomputers.com/bb/ftopic156741.html, if this helps
any I know not.

Davy

Wait for Arthur E for a good answer on roller stuff

 

[Davy]

quote="Anonymou

Wait for Arthur E for a good answer on roller stuf

Trouble is Art might not see his post, so if ya wanna email him Don
I'm sure he'll respond when he gets the time-

e-printerhelp(@)mvps(.)or

remove the brackets leaving no space

Good luck, Dav

 

[Arthur Entlich]

Depending upon the materials used (they all tend to "look" like rubber,
few are) the best cleaner rejuvenator may be water, isopropyl alcohol,
an ammonia base cleaner or a citric oil based solvent, should under
names like "rubber renewal liquid" etc.

Unfortunately, without a proper service manual it's hit and miss as to
what is the best liquid to use.

Art