Brother MFC 8840D - How to reset completely to factory defaults?

  • Thread starter Thread starter Steven Munlo
  • Start date Start date
S

Steven Munlo

Hi,

I want to sell my Brother MFC-8840D laser printer multifunction system.
But how do I reset the system completely? My fax numbers I called are
still inside the journal. Also my last fax page. Any ideas how to clear
the whole system settings to factory deafults? Many thanks!

Steven
 
Steven Munlo said:
Hi,

I want to sell my Brother MFC-8840D laser printer multifunction system.
But how do I reset the system completely? My fax numbers I called are
still inside the journal. Also my last fax page. Any ideas how to clear
the whole system settings to factory deafults? Many thanks!

Steven
Click to expand...

Steven
Press Menu,*,2,8,6,4 (must be done inside two seconds). It should say
maintenance in the display after a short delay.
press 01 (to reset the EEPROM data), then 99 (to exit maintenance mode).
This will reset the EEPROM data but I don't know whether it will clear the
journal.
Tony
 
Steven Munlo said:
Tony,

do you have such a maintenance for the older MFC-9880, also?

Steven
Click to expand...

Steven
For machines with fax
Press the Menu, *, 2, 8, 6, and 4 keys in this order. (Must be done within 2
seconds)
For machines without fax
Press the Menu, 0, 2, 8, 6, and 4 keys in this order. (Must be done within 2
seconds)
The machine beeps for approx. one second and displays "Maintenance Mode " on
the LCD,
indicating that it is placed in the initial stage of the maintenance mode, a
mode in which the
machine is ready to accept entry from the keys.
Select the mode you require (ie. 01 to reset the EEPROM)
NOTES:
• Pressing the 9 key twice in the initial stage of the maintenance mode makes
the
machine exit from the maintenance mode, restoring it to the standby state.
If you want to initialise the EEPROM (Function code: 01), however, you need to
turn
the power off after the initialization procedure without pressing the 9 key
twice.
Pressing the 9 key twice will not fully initialise the EEPROM.
• Pressing the Stop key after entering only one digit restores the machine to
the initial
stage of the maintenance mode.
• If an invalid function code is entered, the machine resumes the initial stage
of the
maintenance mode.
Tony
 
i have problem with MFC-8860DN , was call couple servises in serba, that are not help me to reslove problem.

when i print user settings there is DCP-8060, in menu i only got 4 staff (before problems come was 7 or more Staff) 1. General setup 2. Copy 3. Printer 4. Machine info. Problem is made typing wrong code in Maintenance , which i do not know. Was thinking to factory reset will help to resolve problem and got all 7 or 8 staff how can do settings and use device. Can u help me ?? i think it is europa manufactured ...ser num E63906D6J152420
 
Back
Top