Bottom row of labels empty

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

I have the same problem already posted earlier, but the answer
This is normally due to printers that can't print within 1/2" from the
bottom of the page. You may need to:
Decrease your top margin by a small amount
Add the same small amount to your bottom margin
Move controls on the report down the same small amount
Click to expand...

do not help me (I tried on several HP-Ink Jets).

Even if I go to the minimum at top and bottom margin (I entered on both top
and bottom a "0" and got so finally the minimal value, when I reopend the
page settings), the last row is blank ?

Then I increased the bottom value several times by small values, but this
did not change anything ?
It seems to me, that the sum of the vertical size of all labels always is
greater than the printable size. Only if I reduce the vertical size of the
labels in the report, than it works, but than the position of the text on the
labels of the Zweckform 3474 changes from top to bottom.

Thanks
Gerald Lindinger
 
Do you mind providing:
Height of your labels:
Number of labels down:
Space above the top label on your paper:
Space below the bottom label on your paper:
Minimum top margin allowed by your printer:
Minimum bottom margin allowed by your printer:
 
Labels are Zweckform 3474
Height = 3,7 cm (3,709 created in the report by the label assistant)

Number of labels = 8

Space above the top label on your paper: approx. 0.4mm
Space below the bottom label on your paper: approx. 0.4mm

Minimum top margin allowed by your printer: 1,69 mm
Minimum bottom margin allowed by your printer: 12,45 mm

Gerald Lindinger
 
According to my calculations assuming A4 paper (297 mm height), you won't
get this to work. Your printer is not capable of printing close enough to
either the top or bottom of the page.
1,69 + 12.45 + (8*37) >310
Normally inkjet label paper "burns" half label (18.5 mm) at the top and half
label at the bottom.
 
Back
Top