boot problem

  • Thread starter Thread starter claire
  • Start date Start date
C

claire

hi,

on start, I get a :
1962: aucun SE detect. appuyez sur F1 pour refaire
l'amorçage
(no OS detected, F1 to reboot)
after several attempt ctrl+alt+supp, I manage to load
windows but after a while the C hard drive disappear on my
system?!
thx for your help
 
hi,

on start, I get a :
1962: aucun SE detect. appuyez sur F1 pour refaire
l'amorçage
(no OS detected, F1 to reboot)
after several attempt ctrl+alt+supp, I manage to load
windows but after a while the C hard drive disappear on my
system?!
thx for your help
==========
Your first step should be to download & run the
diagnostic program that the manufacturer of your
hard disk makes freely available on his home site.

Your should also find out if your problem is temperature
related: Is it easier to start the machine when it's warm?
 
Look at IBM Support page at this URL [Unwrap long line!]:

http://www-307.ibm.com/pc/support/site.wss/document.do?
lndocid=MIGR-45383&selectarea=SUPPORT&tempselected=5

A hard disk drive boot error (error codes 1962 and
I999030X) can have the following causes.

Error FRU/Action

The startup drive is not in the boot sequence in
configuration. Check the configuration and ensure the
startup drive in the boot sequence.

No operating system installed on the boot drive. Install
an operating system on the boot drive

The boot sector on the startup drive corrupted. The drive
must be formatted.
Attempt to access and recover (back-up) the failing hard
disk drive
Format the hard disk drive using the operating systems
programs

The drive is defective. Replace the hard disk drive.
 
Back
Top