BNC monitor cabel problem...

  • Thread starter Thread starter Bubba
  • Start date Start date
B

Bubba

I've just bought two 1337 hax0r BNC to DSUB15 cables for my two Eizos (F67
and F550i). Naturally, pins are golden coated, it has double shielding and
an incredible price of 15$, however, dam dorks forgot to mark horizontal
and vertical refresh cables. Since there is no point in guessing what
cable is what, if i don't guess the right pair, what is the worse that
could happen?

TIA!
 
I would use a ohm-meter to test it.
Horiz goes to pin 13, Vert to pin 14.
On one of mine, White is horiz and
black is vertical. There is a small H or V
embossed on the connector.
John
 
(e-mail address removed)'s log on stardate 26 vlj 2005
I would use a ohm-meter to test it.
Horiz goes to pin 13, Vert to pin 14.
On one of mine, White is horiz and
black is vertical. There is a small H or V
embossed on the connector.
Click to expand...

Mine are gray and black. So i suppose that black is vertical, than. BTW,
yes, i hoped for embossed H or V, but nothing is written on them... :(
 
Back
Top