bluescrenview

  • Thread starter Thread starter g.bon
  • Start date Start date
G

g.bon

Hi alls,

I'm trying to optimise an E8600 on Nvidia 790i mobo.

I'm using Occt3.1.0 to test stability.

Then, I offently get blue screens.
So, I'm reading them using bluescreenview.

I always read same things analysing error. Fault came from :
hal.dll+12ab3
ntoskernel.exe+18d7d3

Then, is there any manner to know more which part of hardware failed (so
what hardware crashed) ?

Thanks for any advice,

GB
 
g.bon said:
Hi alls,

I'm trying to optimise an E8600 on Nvidia 790i mobo.

I'm using Occt3.1.0 to test stability.

Then, I offently get blue screens.
So, I'm reading them using bluescreenview.

I always read same things analysing error. Fault came from :
hal.dll+12ab3
ntoskernel.exe+18d7d3

Then, is there any manner to know more which part of hardware failed (so
what hardware crashed) ?

Thanks for any advice,

GB
Click to expand...

HAL is your hardware access layer. Its the operating systems way of saying
that the hardware is broken. This error usually appears after installing /
changing hardware in a PC, so whatever you just replaced or did to the
processor (overclock?) should be reversed or fixed.

You said you are trying to 'optimise' the CPU - do you mean overclock? If
so, then I suspect you went a little too far - perhaps the RAM can't handle
the extra speed? Up your voltages a little, but keep an eye on
temperatures...
 
Back
Top