Bluescreen 7B

  • Thread starter Thread starter David Jones vpac org>
  • Start date Start date
D

David Jones vpac org>

I had a unlicensed image working OK.
System is an ICOP ebox 4854 with 2Gig Embed Disk, and 2 Gig CF
Embed disk is OS.
System is based upon HORM but FBA is configured to start with EWF off

I created a new image and started FBA with the following change:
- Using a 4Gig Embed disk instead of the 2Gig one.
- Licesnsed

I now get a blue screen.
0x7B 756FF528 C0000034 0x0 0x0

Should I have rerun TAP and created a new system component or is there a
simple solution?

System runs OK if I don't instert the CF.
PS Tried it with 1 GIg and 2 Gig (same type) but both give errors.
System also blue screens if I boot with a USB memory stick (actually a USB
CF holder)..but can insert OK after boot.

Cheers
--
David Jones
Software Developer
(Embeddded Systems)
Victorian Partnership of Advanced Computing
Melbourne, Victoria Australia
 
Thanks for that Anthony.
I'll give that a try.

The box has the CF as Slave, but I'll do a double check.
- When I replaced the 2 gig drive and the CF, the system boots OK

With 4 Gig drive and CF system goes into BIOS OK and recognizes both but
Bluescreens on booting.
The Bluescreen when USB memory stick is inserted, even when not the target
of booting is also a concern.

Cheers
--
David Jones
Software Developer
(Embeddded Systems)
Victorian Partnership of Advanced Computing
Melbourne, Victoria Australia
 
Back
Top