blue screen error message

  • Thread starter Thread starter Guest
  • Start date Start date
G

Guest

hi i have just moved my pc from one room to another, however when i go to
start up i get a technical error message on a blue screen stating Stop:
0X0000007B(0XF792F640,0XC0000034,0X00000000,0X00000000)

it also aske you to run ck/disk and recent hadware installed. however i can
not get into anything as this message always appears. i have tryed the
following.
1. Ssafe mode
2. Last good confec
3. boot from XP Disc
4. Re-install op system (the pc lets you re-install however the same error
message appears).

Another point is that when i first booted the system i could not add ant
hardware and the was nothing under hardware in device manager. the error
message above appeared when i re-booted.
any help please.

Monty
 
Monty said:
hi i have just moved my pc from one room to another, however when i go
to start up i get a technical error message on a blue screen stating
Stop: 0X0000007B(0XF792F640,0XC0000034,0X00000000,0X00000000)

it also asked you to run ck/disk and recent hadware installed. however
i can
not get into anything as this message always appears. i have tryed
the following.
1. Ssafe mode
2. Last good confec
3. boot from XP Disc
4. Re-install op system (the pc lets you re-install however the same
error message appears).

Another point is that when i first booted the system i could not add
ant hardware and the was nothing under hardware in device manager. the
error message above appeared when i re-booted.
any help please.
Click to expand...
If you made no changes other than physically moving the computer,
perhaps something got unseated in the move. With the computer turned
off *and* unplugged open the case. Reseat all RAM and device cards.
Make sure all cables and power supply connectors are snug. Make sure
all fans are properly attached to the motherboard and that the inside
of the case is dust bunny-free. Then plug in the computer and start it
with the case still open so you can observe if all fans are properly
running.

Malke
 
Monty said:
hi i have just moved my pc from one room to another, however when i go to
start up i get a technical error message on a blue screen stating Stop:
0X0000007B(0XF792F640,0XC0000034,0X00000000,0X00000000)

it also aske you to run ck/disk and recent hadware installed. however i can
not get into anything as this message always appears. i have tryed the
following.
1. Ssafe mode
2. Last good confec
3. boot from XP Disc
4. Re-install op system (the pc lets you re-install however the same error
message appears).

Another point is that when i first booted the system i could not add ant
hardware and the was nothing under hardware in device manager. the error
message above appeared when i re-booted.
any help please.

Monty
Click to expand...

A STOP 0X0000007B is an INACCESSIBLE_BOOT_DEVICE error. Windows lost
access to the system partition or boot volume during the startup
process.

The second parameter is very important because it can indicate whether
the 0x7B Stop message was caused by file system issues or problems
with storage hardware and drivers. Values of 0xC000034 or 0xC000000E
typically indicate:

Disks or storage controllers that are failing, defective, or
improperly configured.
Storage-related drivers or programs (tape management software, for
example) that are not fully compatible with Windows XP Professional.


As your error message has the 0xC000034 value for parameter 2 this
means that hard drive related problem, either with the data structure
or with the drive itself, is the prime suspect.

What is the make and model of your computer?
Do you know the brand name of the hard drive? If so then go to the
hard drive manufacturer's web site, download their free diagnostic
utility, and run it to check out the hard drive.

When you boot from your XP CD, does the initial menu give you the
option to for "Repair (Recovery Console)"? If so then choose that
option and when the computer finishes loading the Recovery Console and
stops at the Command Prompt enter the following command:

CHKDSK C: /R

If you cannot boot to the Recovery Console from the CD then there are
other ways of getting there. Post a response back here and we will
work on the matter further.

Good luck

Ron Martell Duncan B.C. Canada
--
Microsoft MVP
On-Line Help Computer Service
http://onlinehelp.bc.ca

In memory of a dear friend Alex Nichol MVP
http://aumha.org/alex.htm
 
Back
Top